Joint Sealants
#158
PDS | MSDS
Description:
#158 is a single-component, cold-applied rubber-asphalt joint sealing compound. It is applied under pressure through an extruding nozzle or from a caulking gun for complete joint filling.
Uses:
#158 cold-applied rubberized-asphalt sealer was developed for use in sealing horizontal contraction and dummy joints in pavements and curbs and gutters to prevent the penetration of water and incompressibles into the joint. The product is for use in sealing deep joints up to 1/4″ (6.35 mm) in width or shallow joints with a 1/2″ (12.7 mm) depth maximum.
#164
PDS | MSDS
Description:
#164 is a time-proven, hot-applied polymeric sealant which combines a tenacious adhesive power with high resiliency. #164 provides a positive seal during expansion and contraction of the joint and it will not lose bond in cold weather or flow in hot weather.
Uses:
#164 is ideal for the large-scale sealing of transverse and longitudinal joints in Portland cement concrete pavements and joints in bridges, airport runways, taxiways, etc. It is also used for the maintenance sealing of cracks and joints in concrete and asphalt concrete pavements, parking lots, etc.
1190
PDS | MSDS
Description:
1190 is a hot-applied, single-component polymeric compound developed for the economical maintenance sealing of cracks and joints in Portland cement and asphalt concrete. It offers excellent cohesive and adhesive qualities–it will not lose bond in cold weather or flow in hot weather. Ideal for large-scale sealing projects. Equally effective for medium-to-small-scale projects.
3405
PDS | MSDS
Description:
3405 is a quality, hot-applied, single-component polymeric compound. 3405 was specifically formulated for the cost-effective sealing of cracks and joints in Portland cement and asphalt concrete
highways. It offers excellent bonding properties, high resiliency, and resistance to degradation from weathering. It is ideal for large, medium, and small-scale sealing projects.
3405-M
PDS | MSDS
Description:
3405-M modified, low-modulus, polymeric compound is a quality, hot-applied, single component joint sealant designed to effectively seal cracks and joints in both Portland cement and asphalt concrete surfaces. 3405-M provides a soft, flexible crack and joint sealant that remains pliable. The product will not become brittle and crack in cold weather, nor track in warm weather.
Uses:
3405-M can be used as a joint sealant in concrete pavements as well as a random crack sealant in bituminous pavements.
Control Joints
PDS | MSDS
Description:
ASPHALT EXPANSION JOINT is composed of a blend of asphalts, vegetable fibers, and mineral fillers formed under heat and pressure between two asphalt-saturated liners. It is waterproof, permanent, flexible, and self-sealing.
FIBRE EXPANSION JOINT is composed of cellular fibers securely bonded together and uniformly saturated with asphalt to assure longevity. FIBRE EXPANSION JOINT is versatile, resilient,
flexible, and non-extruding. When compressed to half of its original thickness, it will recover to a minimum of 70% of its original thickness.
CERAMAR® flexible foam expansion joint filler is composed of a unique blend of isomeric polymers in a very small, closed-cell structure. Gray in color, CERAMAR is a lightweight, highly flexible, and resilient material offering recovery qualities of over 99%. This mini closed-cell structure is virtually non-absorbent. It can be wrapped or formed around curved or circular surfaces.
SPONGE RUBBER EXPANSION JOINT is produced to a uniform thickness and density from gray-colored, top-quality, blown sponge rubber. It is easily compressed and has a recovery of 95% or more of the original thickness and a density of not less than 30 pounds per cubic foot (480.56 kg per cubic meter).
CORK EXPANSION JOINT is produced from clean, selected, granulated cork bonded with a phenolic resin. It is highly resilient, will compress without extrusion, and recovers to 95% of its
original thickness after 50% compression.
SELF-EXPANDING CORK EXPANSION JOINT is formed and compressed under heat and pressure to permit expansion up to 140% of original thickness after installation, which permits the filler
to compensate for concrete shrinkage. Normal humidity conditions after installation activate the self-expanding properties of the cork. Product may be cut on jobsite to exact size required.
Uses:
ASPHALT EXPANSION JOINT can be used in 80% of all control joint applications. It is ideally suited for joints in sidewalks, driveways, streets, and single- and multilevel floor slabs. Due to its unique self-sealing characteristic, no subsequent joint sealing is required.
FIBRE EXPANSION JOINT is ideal for use on highways, streets, airport runways, sidewalks, driveways, flatwork, and scores of commercial and industrial applications. To isolate filler from sealant, use SNAPCAP ® from W. R. MEADOWS. Seal with #164, HISPEC ® or SOF-SEAL® from W. R. MEADOWS for maximum protection from water infiltration, weathering, and to assure proper performance.
CERAMAR flexible foam expansion joint is gray in color and provides an excellent joint filler and backup material for use in either horizontal or vertical applications where expansion and contraction movements must be accommodated. CERAMAR is compatible with all currently popular cold-applied sealants, caulks, and hot-pour joint sealing compounds. It is lightweight, highly
flexible, and easy to cut or form in the field without waste. CERAMAR compresses easily for use with shrinkage-compensating concrete and it may be used to relieve stress and pressure in concrete pavements.
HIGHLY FUNCTIONAL JOINTING AND SEALING SYSTEM: Two excellent products, CERAMAR and GARDOX® horizontal sealant from W. R. MEADOWS,may be used together to provide an excellent horizontal sealing system for plaza decks, sidewalks, driveways, and commercial and industrial floors.
SPONGE RUBBER EXPANSION JOINT is frequently used on bridge structures and sewage treatment plants that undergo rapid changes in temperature. Because of its excellent recovery capability during wide temperature variations, SPONGE RUBBER EXPANSION JOINT is used around supporting pillars, drains, hydrants, and lamp and sign posts, as well as in isolation applications or between materials having dissimilar coefficients of expansion.
CORK EXPANSION JOINT and SELF-EXPANDING CORK EXPANSION JOINT are used where high resiliency is needed, such as in sewage plants, floodwalls, spillways, filtration plants, and numerous commercial and industrial applications. SELF-EXPANDING CORK EXPANSION JOINT is especially desirable where a constant friction-fit is required.
CR-90
PDS | MSDS
Description:
CR-90 crack filler is an economical, single-component, hot-applied sealant for use in sealing cracks and joints in Portland cement concrete and asphalt pavements. It is composed of a blend of
asphalt, granulated tire rubber, virgin polymers, and inert fillers.
Uses:
CR-90 is primarily designed for the sealing of cracks in asphaltic pavements. The product can be used in concrete joints as well.
Deck-O-Seal
PDS | MSDS
Description:
DECK-O-SEAL two-part, polysulfide-based joint sealant is a premium-grade, pourable, self-leveling sealant. It is a non-staining sealant that cures at an ambient temperature to a firm, flexible, tear-resistant rubber. DECK-O-SEAL is highly resilient and has excellent recovery characteristics after extended periods of compression or elongation. DECK-O-SEAL has outstanding resistance to most chemicals, to all weather conditions, aging, and shrinkage.
Uses:
DECK-O-SEAL is used for caulking and sealing joints subject to concrete movement to provide a firm, flexible, weather-tight seal. It is ideal for sealing joints on swimming pool decks. It is applicable for both interior and exterior use.
Deck-O-Seal 125
PDS | MSDS
Description:
DECK-O-SEAL 125 two-part, pourable joint sealant is a self-leveling, polysulfide-based sealing compound. It is a non-staining sealant that cures to a firm, flexible, tear-resistant rubber. DECK-O-SEAL 125 is highly resilient and has excellent recovery characteristics, even after extended periods of compression or elongation. It has outstanding resistance to most chemicals, to all weather conditions, aging, and shrinkage. For on-the-job use, DECK-O-SEAL 125 is supplied in pre-measured 96 oz. (2.84 L) kits consisting of the base compound and a separate container of setting agent. There is enough room in the base container for introduction and mixing of the setting agent. NOTE: DECK-O-SEAL 125 is 25% firmer than regular DECK-O-SEAL.
Uses:
DECK-O-SEAL 125 is used for horizontal applications. It is ideal for general purpose sealing of joints and seams subjected to high pedestrian or vehicular traffic, such as mall floors or garage floors. DECK-O-SEAL 125 offers high tensile strength and is excellent for joints in swimming pool floors. (Pool floor applications must be primed with P/G PRIMER from W. R. MEADOWS.)
Deck-O-Seal 150
PDS | MSDS
Description:
DECK-O-SEAL 150 two-part, pourable joint sealant is a self-leveling, polysulfide-based sealing compound. DECK-O-SEAL 150 is a nonstaining sealant which cures to a firm, flexible, tear-resistant rubber. It is highly resilient and has excellent recovery characteristics even after extended periods of compression or elongation. DECK-O-SEAL 150 has outstanding resistance to most chemicals, to all weather conditions, aging, and shrinkage. For on-the-job use, DECK-O-SEAL 150 is supplied in 96 oz. (2.84 liter), pre-measured kits consisting of the base compound and a separate container of setting agent. There is enough room in the base container for introduction and mixing of the setting agent.
Uses:
DECK-O-SEAL 150 is designed for general purpose sealing of joints and seams that are saw cut in forklift traffic areas.
Deck-O-Seal Gun Grade
PDS | MSDS
Description:
DECK-O-SEAL GUN GRADE is a two-component, non-sag, non-flowing, polysulfide-based sealing compound. It is a nonstaining sealant that cures to a firm, flexible, tear-resistant rubber. DECK-O-SEAL GUN GRADE is highly resilient and has excellent recovery characteristics, even after extended periods of compression or elongation. It has outstanding resistance to most chemicals, to all weather conditions, aging, and shrinkage. For on-the-job use, DECK-O-SEAL GUN GRADE is supplied in pre-measured kits containing the base compound and a separate container of setting agent, with enough room in the base container for blending both components.
Uses:
DECK-O-SEAL GUN GRADE is a premium quality, flexible sealing compound for use in applications where short turnaround time is a requirement, such as pool bottom and sidewall repairs and areas subject to pedestrian and vehicular traffic.
DECK-O-SEAL GUN GRADE can be used for general purpose caulking of joints and seams (both above and below water), glazing, weatherproofing, exterior curtain wall sealing, and interior/exterior expansion joint sealing. All submerged applications must be primed with P/G PRIMER from W. R. MEADOWS.
Deck-O-Seal One Step
PDS | MSDS
Description:
DECK-O-SEAL ONE STEP is a single-component, non-sag, elastomeric, polysulfide-based sealing compound used for caulking joints in structures that are subject to movement caused by temperature changes. ONE STEP resists the effects of oil and gasoline when spills are wiped up immediately.
Uses:
DECK-O-SEAL ONE STEP is ideal for glazing operations and sealing joints in concrete structures. It bonds well to concrete, masonry, glass, metal and wood. It is ideally suited for applications when an expansion joint is required. NOTE: Do not paint DECK-O-SEAL. ONE STEP is frequently used in high sloping and vertical expansion joints where a non-sag, watertight, elastomeric
sealant is required. ONE STEP is ideal for use in swimming pools above the waterline, where the tile meets the pool coping. For joints that will be submerged under water, use DECK-O-SEAL 125 for horizontal applications or DECK-O-SEAL GUN GRADE for high sloped or vertical applications. All joints submerged under water must be primed with P/G PRIMER from W. R. MEADOWS.
Direct Fire (PLS)
PDS | MSDS
Description:
DIRECT FIRE (PLS) is formulated specifically for melting and heating in direct fire kettles. It is a single-component, hot-applied, self-leveling sealant to be used for sealing joints and cracks in
Portland cement or asphalt concrete pavements. PLS is easily melted and applied, and will form a flexible, resilient, non-tracking seal suitable for use on both highways and parking lots.
Hi-Spec
PDS | MSDS
Description:
HI-SPEC polymeric, hot-applied sealant is a premium-quality, single-component joint sealing compound. It is formulated with a carefully balanced blend of 100% virgin polymer, asphalt
plasticizers and inert, reinforcing fillers to produce a hot-pour joint sealant with excellent bonding properties, high resiliency, ductility, and resistance to degradation from weathering. It will
not become brittle at low temperatures; it will not flow or migrate from the joint at temperatures up to 140º F (60º C).
Uses:
HI-SPEC is recommended for large-scale sealing of joints and cracks in Portland cement concrete and asphalt concrete pavements because of its excellent cost efficiency, long sealant life, and
high return on investment. Typical applications include sealing expansion and contraction joints in concrete highways (both transverse and longitudinal), joints between concrete pavements,
asphaltic shoulders, and random cracks in both Portland cement concrete and asphalt concrete pavements.
P/G Primer
PDS | MSDS
Description:
P/G PRIMER is a solvent-based, two-component primer system for use with DECK-O-SEAL® and the POURTHANE line from W. R. MEADOWS. It aids in the adhesion of joint sealants to the
interfaces of expansion joints in masonry, swimming pool decks, concrete, or wood.
Poly-Jet Lox
PDS | MSDS
Description:
POLY-JET LOX is a single-component, poly-sulfide, gun-grade, low modulus joint sealant. It cures on exposure to moisture to form an effective joint sealant. POLY-JET LOX is formulated to bond to damp or dry Portland cement concrete joints and cracks. It meets the fuel-immersed bond test requirement of ASTM D 3569. POLY-JET LOX meets Air Force LOX impact-resistance requirements.
Uses:
POLY-JET LOX is specifically formulated to meet the requirements of the liquid oxygen test of the U.S. Air Force and is recommended for use in areas that are exposed to liquid oxygen. POLY-JET LOX passes the requirements of NASA-STD 6001. USAF requirement passes 20 impacts @ 7.2 ft./lb. POLY-JET LOX is not compatible with asphalt and cannot be used in asphaltic concrete pavement or with asphalt-impregnated expansion joint fillers. With its non-sag consistency, POLY-JET LOX can be used on vertical and overhead installations as is, or it can also be used horizontally if tooled immediately after installation. Primer is not required when POLY-JET LOX is applied in concrete joints.
Pourthane NS
PDS | MSDS
Description:
POURTHANE NS is an elastic, low-modulus, one-component, moisture-curing, non-sag, polyurethane sealant. It maintains flexibility and waterproofing joint sealing with high bond strength and provides outstanding durability in the civil and industrial construction markets. The product requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry.
Uses:
POURTHANE NS has very good adhesion to most construction materials. It is particularly recommended for expansion joints between precast concrete panels and seams on wooden, aluminum, and PVC joinery. POURTHANE NS is highly recommended for bonding concrete and baked clay roof tiles.
Pourthane SL
PDS | MSDS
Description:
POURTHANE SL is an elastic, one-component, self-leveling, premium-grade polyurethane sealant specifically developed to be used as a multipurpose horizontal joint sealant in applications
where a high chemical resistance to fuels, oils, and hydrocarbons is required. The product is a moisture cure sealant with excellent adhesive properties and resistance to aging and weathering.
Uses:
POURTHANE SL is used to seal horizontal expansion joints in concrete and cementitious slabs, such as sidewalks, balconies, pavement, terraces, warehouses, factories, civil structures, plazas, runways, and pitch pans.
Safe-Seal 3405
PDS | MSDS
Description:
SAFE-SEAL 3405 is a high performance, polymer-modified, asphalt emulsion horizontal joint and crack sealant. It is a one-component, self-leveling material that can easily be poured into openings 1/8” up to 1” wide. After full cure, the product will remain flexible at cold temperatures and will not flow at high temperatures.
Uses:
SAFE-SEAL 3405 is ideal for small-, medium-, or large-scale sealing projects on parking lots, highways, street maintenance, driveways, and airport aprons and runways. SAFE-SEAL 3405
should be used in any application where superior performance is a necessity or where a hot-applied product is either too dangerous or impractical. It offers excellent bonding properties, high resiliency, and resistance to weathering. It provides a soft, flexible sealer for either concrete or asphalt pavement repairs. This material remains pliable and will not track in warm
weather or become brittle and crack in cold weather.
Sealex E-Z
PDS | MSDS
Description:
SEALEX E-Z is a one part, flexible, and fast drying traffic loop protector and sealant. While totally encapsulating sensitive detection wiring to add greater protection, SEALEX E-Z provides superior joint sealing properties. SEALEX E-Z can even be applied into damp joints. (No standing water). It bonds tenaciously to both Portland cement and asphalt concrete pavements. Sidewall adhesion and flexibility characteristics are retained during cold winter temperatures. SEALEX E-Z will not flow from joints or be picked up by vehicular traffic in hot weather.
Sof-Seal
PDS | MSDS
Description:
Cold-applied SOF-SEAL low modulus horizontal joint sealant is a premium-grade, pourable, two-component sealant composed of a special combination of polymeric compounds that provides
outstanding performance in both Portland cement and asphalt concrete. Once properly mixed and applied, it cures within two hours to a soft, highly flexible, rubber-like material that is capable of
maintaining a sealed joint or crack over a wide temperature range. SOF-SEAL does not track in the summer and will not become brittle at temperatures as low as -20° F (-29° C). It remains soft, flexible, and pliable in the joint, even after repeated freeze/thaw cycles. SOF-SEAL offers excellent elongation, high resiliency, tenacious bonding power, and excellent longevity.
This self-leveling sealant requires no special application equipment and can easily be poured into cracks and joints.
Uses:
SOF-SEAL is a versatile pavement sealant suitable for either large- or small-scale sealing. It is excellent for crack repair and preventive maintenance sealing projects. It is ideal for use when a maintenance group doesn’t have a melter, or where it is not practical to fire up and repeatedly move melter-applicator units (small-scale sealing projects). Typical applications include the sealing of expansion and contraction joints, longitudinal joints and random cracks in concrete pavements, reflective and random cracks in asphalt paving, and asphalt-to-concrete shoulder joints. It is also ideal for high-sheer bridge joint applications. In addition, SOFSEAL can be used as a pitch pan sealant.
Decorative Concrete Sealers
Bella Trix
PDS | MSDS
Description:
BELLATRIX is formulated using dual-protection technology combined with unique hybrid polymers, to offer the ultimate in concrete protection. Proprietary, dual-action technology provides the ultimate in both penetrating and film-forming concrete protection.
BELLATRIX offers environmentally friendly, VOC-compliant protection, which provides increased stain suspension and resistance against most contaminants found in kitchens, retail food stores, restaurants, malls, garages, warehouses, distribution centers, etc.
Uses:
While originally formulated to be used in conjunction with hardened concrete floor systems, such as LIQUI-HARD® and the INDUROSHINE™ polished concrete system from W. R. MEADOWS, BELLATRIX may also be utilized anywhere a clear, high-gloss, dual-action concrete protection system is desired. BELLATRIX is designed for use on previously sealed surfaces, as well as surfaces that have been previously stained or dyed and sealed. (Check compatibility with existing sealer prior to full application.)
CS-309 OTC
PDS | MSDS
Description:
CS-309-OTC acrylic concrete curing and sealing compound is an acrylic polymer solution, specifically formulated for decorative concrete needs. CS-309-OTC provides a tough, clear film that will not after-yellow. It also provides improved weather and stain resistance, combined with a dust-proof sealer.
Uses:
CS-309-OTC is used on driveways, patios, industrial floors, loading docks, swimming pool areas, and exposed aggregate, as well as any exterior decorative surface where enhanced appearance, protection, and sealing of concrete is desired (dries to a low-medium sheen). (Higher gloss films can be achieved with additional applications.) CS-309-OTC offers improved resistance to rain, sun, freezing temperatures, stains, most acids and industrial chemicals, oil, grease, de-icing salts, cleaning agents (except aromatic solvents), and caustics, as well as airborne soot, dust, and other pollutants.
CS-309-25 OTC
PDS | MSDS
Description:
CS-309-25 OTC acrylic curing and sealing compound is a clear, transparent, ready-to-apply, non-yellowing liquid compound formulated with special acrylic polymers and VOC exempt solvents that effectively cures and seals freshly placed concrete.
Once properly applied, CS-309-25 OTC provides a premium-grade seal for optimum moisture retention. This produces a hard, dense, high compressive strength concrete. CS-309-25 OTC will minimize hair checking as well as premature cracking, dusting, spalling, and other common defects that result when concrete is not properly cured. This easy-to-use compound dries quickly and protects the concrete during construction. It resists adhesion of mortar droppings and permits easier cleanup.
Uses:
CS-309-25 OTC is ideal for application on commercial and industrial concrete surfaces, sidewalks, patios, multi-level parking decks, driveways, and parking areas … wherever you want to simultaneously cure and seal exterior concrete surfaces. The use of CS-309-25 OTC on any exterior concrete surfaceprovides a durable, long-lasting finish that offers improved resistance to chemicals, oil, grease, de-icing salts, and abrasion. CS-309-25 OTC provides an attractive, glossy finish that enhances the natural appearance of the concrete.
For interior applications, specify and apply VOCOMP®-20 or VOCOMP-25 curing and sealing compound from W. R. MEADOWS.
CS-309-30 OTC
PDS | MSDS
Description:
CS-309-30 OTC acrylic curing and sealing compound offers a 30% solids content. It is a clear, transparent, ready-to-apply, non-yellowing liquid compound formulated from special acrylic polymers and quick-evaporating solvents that effectively cures and seals freshly placed concrete. Once properly applied, CS-309-30 OTC provides a premium-grade seal for superior moisture retention. This produces a hard, dense, high-compressive strength concrete.
Uses:
CS-309-30 OTC is ideal for application on commercial and industrial concrete surfaces, sidewalks, patios, multi-level parking decks, driveways, and parking areas – wherever you want to simultaneously cure and seal exterior concrete surfaces. The use of CS-309-30 OTC on any exterior concrete surface provides a durable, longlasting finish that has improved resistance to chemicals, oil, grease, de-icing salts, and abrasion. CS-309-30 OTC provides an attractive, low sheen finish that enhances the natural appearance of the concrete.
Deck-O-Shield
PDS | MSDS
Description:
DECK-O-SHIELD is a ready-to-use, water-based sealer/water repellant for natural stone, concrete, and masonry surfaces. DECK-O-SHIELD is designed for use as a sealer/water repellent on waterfalls in or around swimming pools; the product will limit the penetration of water into structurally sound, crack-free surfaces. The product also can be used as a sealer/water repellant for natural stone decks, walkways, or patios; virtually any area located near or around swimming pool areas. Surfaces treated with DECK-O-SHIELD will inhibit the penetration of salts, reducing “whitening” or staining.
Uses:
DECK-O-SHIELD weatherproofs and protects virtually all waterfalls, decks, porches, patios, and walkways around pools, including the following surfaces: natural stone, mortar joint, concrete, brick, concrete block, stucco.
Another advantage DECK-O-SHIELD provides is that the product will not alter the color or tint of the surface after application. There is no need for worry when applying DECK-O-SHIELD, because the product will have no adverse effects on surface appearance after application.
Deck-O-Shield Plus
PDS | MSDS
Description:
DECK-O-SHIELD PLUS is a premium-grade, ready-to-use, water-based sealer formulated for use on natural stone. DECK-O-SHIELD PLUS is formulated specifically to seal porous surfaces and is ideal to use on pool copings and decks protecting them from salt penetration. It can be used on all porous surfaces such as natural stone, tile, concrete, pavers, and grout. DECK-O-SHIELD PLUS provides a solution to spalling and pitting of porous stone and concrete surfaces caused by salt penetration as well as spalling caused by freeze-thaw cycles.
Uses:
DECK-O-SHIELD PLUS weatherproofs and protects virtually all porous surfaces, including decks, porches, patios, and walkways around pools. This includes the following surfaces: natural stone, mortar joint, concrete, brick, concrete block, stucco. Another advantage DECK-O-SHIELD PLUS provides is that the product will not alter the color or tint of the surface after application. There is no need for worry when applying DECK-O-SHIELD PLUS, because the product will have no adverse effects on surface appearance after application.
Decra-Seal
PDS | MSDS
Description:
DECRA-SEAL is a non-yellowing, acrylic-based, high solids, liquid curing and sealing compound for decorative concrete. The product is clear, transparent and easy to apply. DECRA-SEAL also offers improved resistance to water, alkalis, mild acids, and petroleum spirits. The product has been formulated to seal and protect decorative colored concrete by producing a hard yet flexible,
clear film. This product is specifically formulated for the decorative concrete market.
Uses:
DECRA-SEAL is designed for various applications, including exterior concrete surfaces, driveways, patios, swimming pool areas, exposed aggregate, as well as any exterior surface where
protection and sealing of concrete is desired. The use of DECRA-SEAL on any exterior concrete surface provides a durable, long-lasting, high-sheen finish that offers improved resistance to
chemicals, oil, grease, deicing salts, and abrasions.
Decra-Seal OTC
PDS | MSDS
Description:
DECRA-SEAL OTC is specifically formulated for extended working time and provides a premium-grade curing and sealing compound for optimum moisture retention. The high solids, non-yellowing, acrylic film truly enhances both plain gray and decorative concrete. Applying DECRA-SEAL OTC to concrete surfaces also improves resistance to water, alkalis, mild acids, and petroleum spirits. This product has been formulated to cure, seal, and protect concrete by producing a hard (yet flexible), clear film.
Uses:
DECRA-SEAL OTC is designed for various applications, including exterior concrete surfaces, sidewalks, driveways, patios, swimming pool areas, and exposed aggregate, as well as any exterior surface where protection and sealing of concrete is desired. The use of DECRA-SEAL OTC on any exterior concrete surface provides a durable, long-lasting, high-sheen finish that offers improved resistance to chemicals, oil, grease, de-icing salts, and abrasions.
Decra-Seal W/B
PDS | MSDS
Description:
DECRA-SEAL W/B is a non-yellowing, acrylic, polymer-based, high solids, liquid sealer for decorative concrete. The product is clear, transparent and easy to apply. DECRA-SEAL W/B also offers greatly improved chemical resistance when compared to standard curing and sealing compounds. The product has been formulated to seal and protect decorative colored concrete by producing a hard (yet flexible) clear film. This product is specifically formulated for the decorative concrete market.
Uses:
DECRA-SEAL W/B is designed for various applications, including interior/exterior concrete surfaces, driveways, patios, swimming pool areas, and exposed aggregate, as well as any interior/exterior surface where protection and sealing of concrete is desired. The use of DECRA-SEAL W/B on any interior/exterior concrete surface provides a durable, long-lasting finish that has improved resistance to chemicals, oil, grease, deicing salts, and abrasions. DECRA-SEAL W/B is also designed for use with acid stained and decorative concrete surfaces.
Evapre
PDS | MSDS
Description:
EVAPRE evaporation retardant is an economical, high quality, water-based compound. It is specifically designed to form a thin monomolecular film to reduce rapid moisture loss from the concrete surfaces prior to curing. EVAPRE provides a significant aid in producing high-quality concrete flatwork. Rapid evaporation of water is retarded, slab surface conditions are normalized, and workers can adhere more closely to established finishing schedules. EVAPRE is also VOC-compliant.
EVAPRE significantly reduces plastic shrinkage and cracking, wind crusting, stickiness, and sponginess, which often cause poor and uneven surface texture. These conditions result when the hydration is more rapid than the movement of bleed water to the surface. EVAPRE effectively combats and minimizes the effects of rapid-drying conditions such as low humidity, low dew point, high winds, direct sunlight, hot weather, heated concrete, or placement of concrete in a heated enclosure or interior area during cold weather. The protective film shield disappears as soon as the concrete is no longer plastic.
Uses:
EVAPRE is ideal for use as an evaporation retardant for concrete surfaces where the evaporation rate exceeds the rate of bleeding. EVAPRE can be used with the MEADOW-PATCH® and MEADOWCRETE® line of repair mortars from W. R. MEADOWS. It can also be used with condensed silica fume concrete, concrete containing fly ash, and most other cementitous products. When applying surface hardeners, EVAPRE can be used after screeding and after the first floating operation, if necessary.
Evapre-RTU
PDS | MSDS
Description:
EVAPRE-RTU is a ready-to-use evaporation retardant that is high quality and water-based. It is specifically designed to form a thin mono-molecular film to reduce rapid moisture loss
from the concrete surface prior to curing. EVAPRE-RTU provides a significant aid in producing high quality concrete flatwork. Rapid evaporation of water is retarded, slab surface conditions are normalized, and workers can adhere more closely to established finishing schedules when using EVAPRE-RTU. EVAPRE-RTU is also VOC-compliant.
EVAPRE-RTU significantly reduces plastic
shrinkage, cracking, wind crusting, stickiness, and sponginess, which often cause poor and uneven surface texture. These conditions result when the hydration is more rapid than the movement of
bleed water to the surface. EVAPRE-RTU effectively combats and minimizes the effects of rapid drying conditions such as low humidity, low dew point, high winds, direct sunlight, hot weather, heated concrete, or placement of concrete in a heated enclosure or interior area during cold weather. The protective film shield disappears as soon as the concrete is no longer plastic.
Uses:
EVAPRE-RTU is ideal for use as an evaporation retardant for concrete surfaces where the evaporation rate exceeds the rate of bleeding. EVAPRE-RTU can be used with condensed silica fume concrete, concrete containing fly ash, and all cementitous products. When applying surface hardeners, EVAPRE-RTU can be used after screeding and after the first floating operation, if necessary.
Expo-Gloss
PDS | MSDS
Description:
EXPO-GLOSS exposed aggregate sealer is a transparent, high solids, film-forming, curing, sealing, and dust-proofing compound that improves resistance to staining and wear. EXPOGLOSS
is specifically formulated to enhance the beauty of natural stone in exposed aggregate surfaces, while providing maximum surface protection. When properly applied, EXPO-GLOSS produces a glossy “wet-look” finish.
Uses:
EXPO-GLOSS is ideal for freshly finished exposed aggregate surfaces. It is also equally applicable for use on old exposed aggregate surfaces.
Expo-Gloss OTC
PDS | MSDS
Description:
EXPO-GLOSS OTC exposed aggregate sealer is a transparent, high solids, film-forming, curing, sealing and dust-proofing compound that improves resistance to staining and wear. EXPO-GLOSS
OTC is specifically formulated to enhance the beauty of natural stone in exposed aggregate surfaces, while providing maximum surface protection. When properly applied, EXPO-GLOSS OTC produces a glossy “wet look” finish.
Uses:
EXPO-GLOSS OTC is ideal for freshly finished exposed aggregate surfaces. It is also equally applicable for use on old exposed aggregate surfaces.
Sure-Step
PDS | MSDS
Description:
SURE-STEP slip-resistant additive is a finely ground polymer material for addition to concrete sealers for slip resistance. This additive can be added to most film-forming water- and solvent-based sealers, including the CS-309TM, DECRASEAL™, and VOCOMP® series, as well as TIAH® and SEAL CURE™-309-25 from W. R. MEADOWS. Please consult sealer manufacturer prior to using, if using a product not listed above.
SURE-STEP provides improved chemical and abrasion resistance, and is more comfortable to bare feet on treated surfaces than sand or aggregate additives. The product’s low density and insolubility characteristics will help reduce settling and provide optimum performance in its various applications, without changing the viscosity. Due to its low density, SURE-STEP stays suspended in thin materials.
Uses:
SURE-STEP is perfect for use on areas where a non-slip surface is desired. This includes walkways, driveways, garage floors, patios, and other surfaces.
Top-Stop
PDS | MSDS
Description:
TOP-STOP is a spray-applied, water-soluble surface retarder designed to slow the set of surface mortar in concrete to expose the aggregate. It temporarily halts the set of Portland cement at the surface while the concrete below the surface cures normally. TOP-STOP is economical and easy to use, producing beautiful exposed aggregate concrete flatwork with consistent results. TOP-STOP is non-flammable and VOC-compliant.
Uses:
TOP-STOP may be used to produce an architectural finish on concrete slabs by exposing the natural color and texture of the aggregate. TOP-STOP exposes the aggregate on floor slabs, sidewalks, tilt-up and precast panels, or any normal horizontal concrete application. TOP-STOP produces roughened bonding surfaces for subsequent concrete toppings and roughens horizontal surfaces for construction joints in power plants, dams, and other civil engineering projects.
Polished Concrete Flooring
Liqui-Hard
PDS | MSDS
Description:
LIQUI-HARD concrete densifier and chemical hardener compound is a ready-to-use, colorless liquid, formulated with chemically reactive raw materials to harden and dustproof concrete. When properly applied, LIQUI-HARD will offer substantial improvement in abrasion and chemical resistance and will significantly improve the durability of the concrete surface when compared to untreated concrete. As LIQUI-HARD is applied and penetrates into the concrete surface, a chemical reaction takes place, producing a byproduct that fills in the pores of the concrete. This process produces a substantially denser concrete surface with enhanced durability. In addition to the densifying and hardening action, LIQUI-HARD also solidifies the concrete, eliminating dusting and pitting.
Uses:
LIQUI-HARD is recommended for use wherever hardened, dust-proofed, and improved chemical- and abrasion-resistant surfaces are required. Ideal applications include floors in industrial plants and warehouses, storage silos, sewage plants, chemical processing facilities, refineries, and heavy pedestrian floor traffic areas, such as civic centers, sports arenas, stadiums, hospitals, airports, and museums. LIQUI-HARD can successfully be used in conjunction with shake-on hardeners.
Liqui-Hard Ultra
PDS | MSDS
Description:
LIQUI-HARD ULTRA concrete densifier and chemical hardener is a waterborne, lithium-silicate-based, ready-to-use, colorless liquid, which hardens and dustproofs concrete at a molecular
level. After proper application, the finished surface offers substantial improvement in abrasion and chemical resistance and will significantly improve the durability of the surface when compared to untreated concrete. As LIQUI-HARD ULTRA is applied and penetrates into the concrete surface, a chemical reaction takes place, producing a byproduct that fills in the pores of the concrete. LIQUI-HARD ULTRA solidifies the concrete, eliminating dusting and pitting.
LIQUI-HARD ULTRA is chemically engineered to provide timely, quick, sustainable performance. The product is simply sprayed on and then left moist on the surface for 20 minutes. In this short period of time, the colorless liquid quickly penetrates into the surface. After application, the resulting surface features enhanced protection and sheen, coupled with superior abrasion resistance. This environmentally safe, water-based product features a zero VOC content and provides an attractive option in green building applications.
Uses:
LIQUI-HARD ULTRA is recommended for use wherever hardened, dust-proofed, and improved chemical and abrasion resistant surfaces are required. Ideal applications include floors in restaurants, industrial plants, warehouses, storage silos, sewage plants, chemical processing facilities, refineries, and heavy pedestrian floor traffic areas, such as civic centers, sports arenas,
stadiums, hospitals, airports, and museums. LIQUI-HARD ULTRA can successfully be used in conjunction with shake-on hardeners.
Induroshine
PDS | MSDS
INDUROSHINE is an environmentally friendly, jobsite friendly polished concrete flooring system that combines “green” concrete grinding and polishing system from our approved network of applicators with LIQUI-HARD 0.0 g/L VOC-compliant concrete densifier and sealer from W. R. MEADOWS. This provides owners and specifiers with the best polished concrete flooring system on the market. Durability that lasts!
Concrete Curing and Sealing Compound
VOCOMP-20
PDS | MSDS
Description:
VOCOMP-20 water-based acrylic curing and sealing compound is formulated using special acrylic polymers in a true water-based carrier. Once properly applied, VOCOMP-20 provides a durable film for efficient moisture retention. VOCOMP-20 appears milky white in the container and, when first applied, leaves a bluish cast on the concrete for easy visual confirmation of coverage.
VOCOMP-20 dries clear to provide a transparent sheen finish. The sheen can be controlled by the number of coats applied. VOCOMP-20 resists yellowing from ultraviolet exposure and provides a durable, long-lasting finish that offers improved resistance to chemicals, petroleum, and abrasives.
VOCOMP-20 will minimize hair-checking, premature cracking, dusting, and spalling. However, good concrete and good concreting practices should be used, as VOCOMP-20 is not a cure-all for improperly mixed or placed concrete.
Uses:
VOCOMP-20 water-based acrylic curing and sealing compound may be quickly and easily applied to simultaneously cure and/or seal new interior or exterior as well as vertical or horizontal concrete surfaces. It is ideal for application on commercial and industrial floors, sidewalks, basement and garage floors, multi-level parking decks, patios, driveways, and parking areas. VOCOMP-20 dries very quickly to protect and enhance the natural appearance of concrete.
VOCOMP-25
PDS | MSDS
Description:
VOCOMP-25 water-based acrylic concrete sealer is a ready-to-use concrete curing and sealing compound formulated of special acrylic polymers in a true waterbased carrier. VOCOMP-25 provides improved resistance to rain, sun, freezing temperatures, most acids and industrial chemicals, petroleum, deicing salts, cleaning agents (except aromatic solvents), diluted caustics, and other pollutants.
VOCOMP-25 appears milky white in the container and, when first applied, leaves a bluish cast on the concrete for easy visual coverage. VOCOMP-25 dries clear to provide a transparent sheen finish. This sheen can be controlled by the number of coats applied.
Uses:
VOCOMP-25 may be used wherever a medium-to-high sheen is desired to bring out the natural beauty of concrete without discoloring, checking, or peeling. It may be applied to simultaneously cure, seal, and dust-proof new, old, interior, exterior, horizontal, and vertical concrete surfaces. VOCOMP-25 is ideal for curing, sealing, and dust-proofing driveways, sidewalks, patios, swimming pool areas, and commercial and industrial floors. Horizontal surfaces protected with VOCOMP-25 offer excellent wearing qualities for foot and vehicular traffic. If, after prolonged usage, traffic patterns appear, the surface can be washed clean and re-coated to restore the original beauty. Good concrete and good concreting practices should be followed, as VOCOMP-25 is not a
cure-all for improperly mixed or placed concrete.
VOCOMP-30
PDS | MSDS
Description:
VOCOMP-30 is a ready-to-use, 30% solids concrete curing and sealing compound formulated of special acrylic polymers in a true water-based carrier. VOCOMP-30 provides improved resistance to rain, sun, freezing temperatures, most acids and industrial chemicals, petroleum, deicing salts, cleaning agents (except aromatic solvents), diluted caustics, and other pollutants.
Color-wise, VOCOMP-30 appears milky white in the container and, when first applied, leaves a bluish cast on the concrete for easy visual coverage. VOCOMP-30 dries clear to provide a transparent sheen finish. This sheen can be controlled by the number of coats applied.
Uses:
VOCOMP-30 may be used wherever a thicker film, with a medium-to-high sheen, is desired to bring out the natural beauty of concrete without discoloring, checking, or peeling. When properly applied, VOCOMP-30 provides a premium-grade seal for superior moisture protection. It may be applied to simultaneously cure, seal, and dust-proof new, old, interior, exterior, horizontal, and vertical concrete surfaces. VOCOMP-30 is ideal for curing, sealing, and dust-proofing driveways, sidewalks, patios, swimming pool areas, and commercial and industrial floors. Horizontal surfaces protected with VOCOMP-30 offer excellent wearing qualities for foot and vehicular traffic. If, after prolonged usage, traffic patterns appear, the surface can be washed clean and re-coated to restore the original beauty. Good concrete and good concreting practices should be used, as VOCOMP-30 is not a cure-all for improperly mixed or placed concrete.
Misc.
Ultrilite Degreaser
PDS | MSDS
Description:
ULTRITE DEGREASER is a heavy-duty concrete degreaser and stripper, which will biodegrade. It naturally and safely replaces mineral spirits and chlorinated solvent-based heavy-duty concrete degreaser products.
Uses:
ULTRITE DEGREASER penetrates concrete surfaces on contact to soften, lift, and remove a wide range of oils, polymers, fats, and greases. Use ULTRITE DEGREASER to remove dirt, tire marks,
oil spills, grease, and other contaminants. It will also remove most curing compounds and cure/seals from concrete floors. Periodic stripping of concrete floors is in keeping with good concrete maintenance practices. It is ideal for use in warehouses, industrial plants, food processing plants, schools, automotive plants, parking garages, plazas, and service stations – anywhere cleaning and stripping of concrete surfaces is required.
