Safety and Training Meeting Report

You are here:

Home
Protected: Forms
Safety and Training Meeting Report

Saftey and Training Meeting Report

Job Number:
Project:
Job Site Location:
Topic(s):
Conducted By:
Safety
Keep a multipurpose fire extinguisher (rated A-B-C) in your vehicle or nearby. Check the pressure gauge monthly. Recharge or replace when needed. Read the material safety data sheets (MSDS) when chemicals are present.
Do not wear loose fitting clothing. Keep long hair tied back and under a hat. Remove all loose jewelry. Moving parts can pull in clothes, hair, and loose objects, and cause severe injuries to the operator.
Keep a first-aid kit in your vehicle. Make sure it contains all the proper supplies, an eye wash solution, and an up-to-date listing of emergency medical phone numbers.
Minimize work area exposure to silica dust while grinding, sawing, cutting, drilling or disturbing materials containing silica using these Best Engineering Controls: Use PPE - Respirator mask, protective clothing coveralls, and eye protection HEPA Filter Dust Collector with pulse filter cleaner. Use appropriate Tools with vacuum attachments (shrouds, hoses, filters) – properly connected per manufacturer requirements. Exhaust fans to minimize visible airborne dust. Ensure dust containment is maintained during disposal.
PPE Checklist
- Hard Hat
- Gloves
- Mask
- Safety Glasses
- Heavy Duty Shoes
- Respirator
- Hairnet
- Earplugs
- Clothing cover all
Stay in designated areas at all times Power tools must be in working and safe conditions Barricade or isolate area where you are working using cones, caution tape, or plastic Food or beverages must be consumed in designated break areas only Please keep mixing area and trucks organized and clean
Print Name: