See Color Charts at the bottom
ACCELERA
PDS | MSDS
ACCELERA is part of DUR-A-FLEX’s family of fast-track,seamless floor systems. ACCELERA is a 100% solids, two component proprietary blend of polymers featuring a fastcuring resin and hardener. For coloring ACCELERA pigment packs are available. ACCELERA is UV stable andoffers excellent stain resistance.
ACCELERA HB
PDS | MSDS
ACCELERA HB is part of the ACCELERA family of fast-track, seamless floor systems. ACCELERA HB is a 100% solids hybrid floor system consisting of POLY-CRETE SL self-leveling cementitious urethane base coat with a flintshot quartz broadcast, an ACCELERA pigmented second flintshot quartz broadcast, and two pigmented ACCELERA topcoats. ACCELERA HB is UV stable and offers excellent stain resistance.
ACCELERA HC
PDS | MSDS
ACCELERA HC is part of the ACCELERA family of fast-track, seamless floor systems. ACCELERA HC is a 100% solids hybrid floor system consisting of a POLY-CRETE SL self-leveling cementitious urethane base coat with a decorative vinyl chip broadcast, an ACCELERA second broadcast of decorative vinyl chips, and two clear ACCELERA topcoats. ACCELERA HC is UV stable and offers excellent stain resistance.
ACCELERA HQ
PDS | MSDS
ACCELERA HQ is part of the ACCELERA family of fast-track, seamless floor systems. ACCELERA HQ is a 100% solids hybrid floor system consisting of POLY-CRETE SL self-leveling cementitious urethane base coat with a decorative quartz broadcast, a second ACCELERA decorative quartz broadcast, and two clear ACCELERA topcoats. ACCELERA HQ is UV stable and offers excellent stain resistance.
ACCELERA Q
PDS | MSDS
ACCELERA Q is part of the ACCELERA family of fast-track, seamless floor systems. ACCELERA Q is a 100% solids, two-component proprietary blend of polymers featuring fast-curing applications of a primer, two broadcasts of decorative quartz, and two clear topcoats. ACCELERA Q is UV stable and offers excellent stain resistance.
ARMOR-STAT ESD FLOOR SYSTEM
PDS | MSDS
ARMOR-STAT ESD is an epoxy/urethane, pigmented, static dissipative floor coating system. This system provides a static dissipative (106-109 /Square) floor from primer though the satin finish topcoat. ARMORSTAT ESD provides an average of 5v Body Voltage Generation when utilizing dissipative footwear. Resistance readings are consistent for the life of the floor and are independent of ambient humidity. ARMOR-STAT ESD protects new and existing concrete floors from many chemicals and was designed to provide the ultimate in wear resistance, chemical resistance and cleanability. The system is designed for areas where dirt or dust cannot be tolerated while providing static dissipation to protect against electrostatic discharge.
ARMOR TOP
PDS | MSDS
ARMOR TOP is a two, three or four component aliphatic urethane protective coating. It was formulated for high traffic areas to protect against chemicals and wear. It is available in either a clear or pigmented, gloss or satin finish, and with or without high wear resistant aluminum oxide (grit).
BIO-PRUF ANTIMICROBIAL
PDS | MSDS
All DUR-A-FLEX, INC. 100% Solids Flooring systems are available with BIO-PRUF® Antimicrobial*. This treatment will provide the floor with long-term protection against a broad spectrum of bacterial and fungal attack. It will also help prevent surface growth, musty odors, permanent staining and the development of fungal spores. BIO-PRUF® Antimicrobial* is formulated into the Flooring system from the basecoat up through the topcoat. BIO-PRUF® will not discolor or detract from the chemical or physical properties of the system. The treatment is resistant to leaching and is non-volatile during normal application and use conditions. BIO-PRUF® Antimicrobial* cannot be post-added in the field. It is formulated into the resin during production.
CRYL-A-CHIP
PDS | MSDS
CRYL-A-CHIP is 100% reactive fast curing high strength methyl methacrylate (MMA) based acrylic flooring system. It is designed to provide a terrazzo like appearance with the benefits of a seamless floor. It is a nominal 1/16 inch (1.5 mm) overlay system composed of primer, double broadcast of MICRO or MACRO decorative colored chips and topcoats. This system cannot be thinned with solvents. Surface finish can be smooth or slip resistant.
CRYL-A-CHIP SL
PDS | MSDS
CRYL-A-CHIP SL is 100% reactive, fast curing, high strength methyl methacrylate (MMA) based acrylic flooring system. It is designed to provide a terrazzo like appearance with the benefits of a seamless floor. It is a nominal 3/16 inch (4.75 mm) overlay system, composed of primer, self-leveling overlay with a broadcast of MICRO or MACRO decorative colored chips and topcoats. This system cannot be thinned with solvents. Surface finish can be smooth or slip resistant.
CRYL-A-CLEAN
PDS | MSDS
CRYL-A-CLEAN is an inhibited methyl methacrylate (MMA) monomer based cleaner. This material cannot be thinned with solvents.
CRYL-A-COLOR
PDS | MSDS
CRYL-A-COLOR is a liquid pigment dispersion designed to be used to pigment MMA resins. All the Cryl-A-Flex colors are available. These dispersions can be used to pigment CRYL-A-PRIME P-101, CRYL-A-GLAZE G-201 and CRYL-A TOP T-301 in the field.
CRYL-A-COVE
PDS | MSDS
CRYL-A-COVE is a 100% reactive, fast curing, high strength, methyl methacrylate (MMA) based, acrylic reactive resin. It is a thixotropic resin designed to form a monolithic bond with other CRYL-A-FLEX systems.
CRYL-A-FLEX
PDS | MSDS
commercial/industrial floor coatings and overlays are based on 100% reactive, fast curing, high strength, methyl methacrylate (MMA) based acrylic reactive resins. The product line is VOC compliant (<100 g/L), UV stable, impact and abrasion resistant, non-porous and impervious. These flooring systems will not chalk, crack or age-harden. They achieve full cure and chemical resistance in one hour and can be installed below freezing. All CRYL-A-FLEX resins are available with Bio-Pruf® antibacterial and fungal additive.
CRYL-A-FLOOR
PDS | MSDS
CRYL-A-FLOOR is a 100% reactive, fast curing, high strength, methyl methacrylate (MMA) based, acrylic flooring system. It is a nominal 1/8 (flintshot) inch (3 mm) overlay system, composed of primer, double broadcast and topcoats. This system cannot be thinned with solvents. Surface finish is slip resistant.
CRYL-A-GLAZE G-201
PDS | MSDS
CRYL-A-GLAZE G-201 is a 100% reactive, fast curing, high strength, methyl methacrylate (MMA) based, acrylic reactive resin. It is formulated to form a monolithic bond with other CRYL-A-FLEX systems and to be UV resistant.
CRYL-A-PRIME P-101
PDS | MSDS
CRYL-A-PRIME P-101 is a 100% reactive, fast curing, high strength, methyl methacrylate (MMA) based, acrylic reactive resin. It is formulated to form a cohesive bond with the substrate. This system cannot be thinned with solvents.
CRYAL-A-QUARTZ
PDS | MSDS
CRYL-A-QUARTZ is a 100% reactive, fast curing, high strength, methyl methacrylate (MMA) based, acrylic flooring system. It is a nominal 1/8 (Q-28) – 3/16 (Q-11) inch (3-4.75 mm) overlay system, composed of primer, double broadcast of DUR-AFLEX decorative aggregate and topcoats. This system cannot be thinned with solvents. Surface finish can be smooth or slip resistant.
CRYL-A-SHIELD
PDS | MSDS
CRYL-A-SHIELD is a 100% reactive, fast curing, high strength; methyl methacrylate (MMA) based acrylic flooring system. It is formulated clear as a thin film 12-50 mils (0.25-1.25 mm) coating/sealer. Typical systems consist of 1-3 coats. CRYL-ASHIELD is used to seal and eliminate concrete dusting, increase substrate strength and aesthetic considerations. Surface finish can be smooth or slip resistant. This system cannot be thinned with solvents.
CRYL-A-STAIN
PDS | MSDS
CRYL-A-STAIN is a 100% reactive, fast curing, methyl methacrylate (MMA) based acrylic stain floor coating system. Different color MMA based tints can be added to the primer and/or topcoat(s) to seal and give a translucent color to concrete substrate. This system is a high wear and low maintenance alternative to traditional methods of staining and dyeing concrete. The typical system consists of 2 coats yielding a thickness of 30 mils (0.76 mm). The colors are unique to each concrete type and surface. The surface finish can be with a single color or colors can be combined in designs and multi-colors to achieve unique results. Surface finish can be smooth or slip resistant. This system cannot be thinned with solvents.
CRYL-A-STAT ESD-401
PDS | MSDS
CRYL-A-STAT ESD-401 is a 100% solids conductive sealer methyl methacrylate (MMA) based, acrylic reactive resin. It is formulated to form a monolithic bond with other DUR-A-FLEX systems and to be UV resistant.
CRYL-A-TEX
PDS | MSDS
CRYL-A-TEX is a 100% reactive, fast curing, high strength; methyl methacrylate (MMA) based polymer concrete. It is a three-component mortar consisting of a MMA liquid component, a powder component made from sands and fillers, and CRYL-A-CURE (BPO), which initiates the cure. The mortar can be extended with washed and dried pea gravel to produce a polymer concrete for deeper applications. This system cannot be thinned with solvents.
CRYL-A-TOP T-301
PDS | MSDS
CRYL-A-TOP T-301 is a 100% reactive, fast curing, high strength, methyl methacrylate (MMA) based, acrylic reactive resin. It is formulated to form a monolithic bond with other CRYL-A-FLEX systems and to be UV resistant.
CRYL-A-TOP T-303
PDS | MSDS
CRYL-A-TOP T-303 is a 100% reactive, fast curing, high strength, methyl methacrylate (MMA) based, acrylic reactive resin. It is formulated to form a monolithic bond with other CRYL-A-FLEX systems and to be UV resistant.
CRYL-A-WALL VC
PDS | MSDS
CRYL-A-WALL VC is 100% reactive, fast curing, high strength, methyl methacrylate (MMA) based, acrylic wall coating system. It is designed to provide a terrazzo appearance with the benefits of a seamless surface on block or concrete walls. It is composed of primer, double broadcast of decorative chips and topcoats. Surface finish can be smooth or textured. This system cannot be thinned with solvents.
DUR-A-CHIP
PDS | MSDS
DUR-A-CHIP SEAMLESS FLOORING is a decorative, “poured in place” flooring system consisting of liquid polymers and color-fast decorative chips. DUR-A-CHIP incorporates DUR-A-GARD for the base coat and is grout coated with DUR-A-GLAZE #4 and top coated with ARMOR TOP. DUR-A-CHIP is designed to provide a terrazzo-like appearance. In addition to its seamless cleanability, it requires no waxing. Surface finish can be smooth or slip-resistant.
DUR-A-CRETE
PDS | MSDS
DUR-A-CRETE is a heavy duty, trowel applied, seamless floor topping comprised of specially formulated two component, 100% solids epoxy resins and select graded colored sand aggregate. It is designed to repair deteriorated floors and to protect new floors from chemical deterioration and industrial abuse. DUR-A-CRETE adheres tenaciously to properly prepared concrete, quarry tile, ceramic tile and brick pavers. A seamless, sanitary, cove base can be incorporated into this system.
DUR-A-GARD
PDS | MSDS
DUR-A-GARD Epoxy Coating is a pigmented, two component, low odor, 100% solids, thermosetting epoxy designed especially for flooring applications subjected to moderate traffic and chemicals. DUR-A-GARD Epoxy Coating is ideally suited for application on concrete. This coating is extremely durable, sanitary and easy to clean.
DUR-A-GARD 50-50
PDS | MSDS
DUR-A-GARD 50/50 epoxy coating is a pigmented, two component, low odor, 100% solids, thermosetting epoxy designed especially for flooring applications subjected to moderate traffic and chemicals. This coating is extremely durable, sanitary and easy to clean. The high gloss, tile-like finish is stain-resistant and virtually unaffected by oil, grease, gasoline, strong detergents and salt.
DUR-A-GARD ESD
PDS | MSDS
DUR-A-GARD ESD is a 2-component, pigmented 100% solids static dissipative coating. This coating provides a static dissipative (Ω/Square) surface with a high gloss finish. DUR-A-GARD ESD provides an average of 14v Body Voltage Generation when utilizing dissipative footwear. Resistance readings are consistent for the life of the floor and are independent of ambient humidity. DUR-A-GARD ESD protects new and existing concrete floors from many chemicals and was designed for ultimate cleanability. The system is designed for areas where dirt or dust cannot be tolerated while providing static dissipation to protect against electrostatic discharge.
DUR-A-GARD NOVOLAC
PDS | MSDS
DUR-A-GARD NOVOLAC epoxy is a pigmented two component, performance topcoat over Dur-A-Gard epoxy coatings and is designed to provide protection against chemicals, acids, solvents, and high temperatures.
DUR-A-GARD SL
PDS | MSDS
DUR-A-GARD SL is a combination of pigmented SHOP FLOOR 100% solids epoxy and a special blend of natural quartz aggregates and fillers. The epoxy and aggregates are fused together during application to form an extremely durable, easy to clean, monolithic surface. It protects concrete floors from chemical attack and industrial abuse, as well as restores damaged, old concrete to better than new condition. This floor system was designed for ultimate cleanability, and for areas where dirt or dust cannot be tolerated. The high gloss tile-like finish is stain resistant and virtually unaffected by oil, grease, gasoline, strong detergents, salt, etc.
DUR-A-GLAZE MVP
PDS | MSDS
Dur-A-Flex DUR-A-GLAZE MVP PRIMER is a clear, 100% solids epoxy moisture mitigation system formulated to bond to concrete with relative humidity (RH) as high as 95%. It is designed to reduce moisture vapor emission levels up to 20 lbs/1000 sq. ft./24 hours to 3 lbs/1000 sq. ft./24 hours or less.
DUR-A-GLAZE #4
PDS | MSDS
DUR-A-GLAZE #4 is a clear, two component 100% solids, thermosetting epoxy designed specifically for applications such as DUR-A-QUARTZ, SHOP FLOOR, DUR-A-CRETE, and DUR-A-CHIP. It cures solid yet does not become “brittle” thus retaining a sufficient amount of resilience to withstand impact and vibration.
DUR-A-GLAZE #4 COVE REZ
PDS | MSDS
DUR-A-POXY #245 is a two-component water-based epoxy. It is designed for use as an epoxy paint, as a waterproof coating for inside basement walls, as a base coat for vinyl chip seamless flooring and as an additive for various Portland cement patching/resurfacing mixtures to enhance adhesion and overall quality. When equal amounts of hardener and resin are combined, an irreversible chemical reaction occurs that hardens the blended epoxy into a protective coating. It exhibits the good adhesive properties of epoxies, is non-flammable and easy to use.
DUR-A-GLAZE #4 ESD
PDS | MSDS
DUR-A-GLAZE #4 ESD PRIMER is a 2-component, 100% solids Static Dissipative Primer. This coating was designed as a concrete primer for DUR-A-GARD ESD. It provides a static dissipative reading of 106-109 _/Square. DUR-A-GLAZE #4 ESD PRIMER provides an average of 14v Body Voltage Generation when utilizing dissipative footwear. Resistance readings are consistent for the life of the floor and are independent of ambient humidity.
DUR-A-GLAZE #4 FLEX RESIN
PDS | MSDS
DUR-A-GLAZE #4 FLEX RESIN is the resin component of a tough, high quality, 100% solids, elastomeric high build epoxy coating. It is applied on floors and molded up onto vertical areas, over curbs, etc. as a seamless elastomeric membrane. It can be applied to virtually any shape or contour by brush, paint roller, trowel or squeegee. It is mixed with one of the DUR-A-GLAZE #4 hardeners to suit your particular application requirements. Please review the LIMITATIONS section of this sheet for restrictions. DUR-A-GLAZE #4 FLEX RESIN is designed for use beneath epoxy flooring systems and as a base coat for vinyl chip seamless flooring. It can also be thickened and used as a crack & joint filler. DUR-A-GLAZE #4 FLEX RESIN can be applied on properly prepared concrete, plywood, and quarry tile.
DUR-A-GLAZE #4 TIE COAT II
PDS | MSDS
DUR-A-GLAZE #4 TIE-COAT II HARDENER is part of a clear, two-component epoxy system designed to enhance the adhesion of a new coating to surfaces that are typically hard to bond together such as aged epoxies, quarry tiles, ceramic tiles, steel, dense concrete and aged urethanes. Used with DURA-GLAZE #4 RESIN, it is designed to adhere tightly to an existing surface or to provide a good bonding surface for a new coating. Retains excellent adhesive properties and will not become brittle due to aging or cold temperatures.
DUR-A-GLAZE #4 WB PRIMER SEALER
PDS |MSDS
DUR-A-GLAZE #4 WB PRIMER-SEALER is a water-borne, two component, epoxy primer/sealer designed to seal concrete floors.
DUR-A-GLAZE #5
PDS | MSDS
DUR-A-GLAZE #5 is a clear, two-component aliphatic polyaspartic ester high performance polymeric system. It is designed to provide protection against many solvents, acids and chemicals. DUR-A-GLAZE #5 is resistant to deterioration by ultra-violet rays emitted by sunlight, high intensity lighting systems, fluorescent lighting, etc. It is applied as the final topcoat. When the resin and the hardener are combined and mixed thoroughly, an extremely dense chemical cross linking action occurs. This special cross-linking of the two components produces a coating that provides abrasion resistance equal to or better than ambient temperature cured epoxy or two- component aliphatic urethane systems.
DUR-A-GLAZE NOVOLAC
PDS | MSDS
DUR-A-GLAZE NOVOLAC epoxy is a clear or pigmented two component, performance topcoat for broadcast systems. It is designed to provide protection against chemicals, acids, solvents, and high temperatures.
DUR-A-GLAZE RAPID-PATCH
PDS | MSDS
DUR-A-GLAZE RAPID-PATCH is a rapid-curing, twocomponent, 100% solids, thermosetting epoxy designed specifically for cracks, holes, spalls and voids in concrete up to ¼” thick. RAPID-PATCH is an important step during installation to assure edges from cracks, holes, saw-cuts, etc are uniform with the surrounding surface prior to coating.
DUR-A-POXY No. 245
PDS | MSDS
DUR-A-POXY #245 is a two-component water-based epoxy. It is designed for use as an epoxy paint, as a waterproof coating for inside basement walls, as a base coat for vinyl chip seamless flooring and as an additive for various Portland cement patching/resurfacing mixtures to enhance adhesion and overall quality. When equal amounts of hardener and resin are combined, an irreversible chemical reaction occurs that hardens the blended epoxy into a protective coating. It exhibits the good adhesive properties of epoxies, is non-flammable and easy to use.
DUR-A-QUARTZ
PDS | MSDS
DUR-A-QUARTZ EPOXY FLOORING is a combination of Q28 or Q11 Colored Quartz Aggregate fused together during application into a seamless surface, with specially formulated, high quality, clear, 100% solids, epoxy formulation. DUR-A-QUARTZ Epoxy Flooring will protect a new floor from industrial abuse and harsh chemical spillage, and will restore the old floor to a better than new condition. It is available in three different textures: standard slip resistant, orange peel and smooth.
DUR-A-SHIELD II
PDS | MSDS
DUR-A-SHIELD #2 is a two component, transparent, epoxy primer/sealer designed for penetrating and sealing concrete floors. It is designed to comply with the new government regulations concerned with reducing VOC content in floor coatings. It cures to form a tough, smooth, glossy surface. It offers equal or better chemical resistance and performance properties than the old version but with added benefits. DUR-A-SHIELD #2 is recommended as a primer for other DUR-A-FLEX epoxy coatings and resurfacing systems.
DUR-A-WALL VC
PDS | MSDS
DUR-A-WALL VC decorative epoxy wall system is a two-component, low odor, 100% thermosetting formulation of DUR-A-GARD (pigmented) epoxy, DUR-A-GLAZE # 4 (clear) epoxy and Dur-A-Flex decorative chip that is designed especially for wall applications. DUR-A-WALL VC is ideally suited for application on concrete, wood, drywall or block. This system is seamless, extremely durable, sanitary and easy to clean. The high gloss or satin finish of the urethane topcoat is stain resistant and virtually unaffected by oil, grease, strong detergents and salt. The urethane topcoat has a non-ambering, abrasion resistant formula that locks out chemicals and stains and prevents them from penetrating into the wall surface.
DUR-A-WALL/WALL FGR
PDS | MSDS
DUR-A-WALL and DUR-A-WALL FGR Epoxy Wall Systems are pigmented, two component, low odor, 100% thermosetting epoxy formulations. DUR-A-WALL FGR (fiberglass reinforced) uses the same epoxy system as our DUR-A-WALL system but incorporates a fiberglass mat designed especially for sheet rock wall applications. DUR-A-WALL is ideally suited for application on concrete, wood, drywall, cement board or block. This coating is extremely durable, sanitary and easy to clean. A urethane topcoat with a high gloss or satin finish is recommended to provide protection against very aggressive solvents, acids and alcohols. Urethane topcoats are stain resistant and provide a high degree of abrasion resistance.
ELAST-O-COAT
PDS | MSDS
ELAST-O-COAT Waterproofing Membrane is a tough, high quality, 100% solids, 2 part elastomer-modified, high build epoxy coating. It is applied on floors and molded up onto vertical areas, over curbs, etc. as a seamless elastomeric membrane. It can be applied to virtually any shape or contour by brush, paint roller, trowel or squeegee. ELAST-O-COAT is designed for use underneath epoxy flooring systems and as a base coat for vinyl chip seamless flooring to provide a vibration resilient cushion and to deaden sound. It can also be used as a traffic-bearing surface in light traffic areas and as a crack & joint filler. ELAST-O-COAT can be applied on properly prepared concrete, plywood, metal and quarry tile.
FISH EYE ELIMINATOR
PDS | MSDS
FISH EYE ELIMINATOR is a special liquid additive that is formulated to allow epoxy systems to flow out on silicone or oil contaminated substrates, including existing epoxy and urethane floors. The additive decreases fish eye and/or cratering by lowering the surface tension of the product to which it is added. This helps prevent beading of the liquid on the contaminated substrate. FISH EYE ELIMINATOR is a good product to have when installing floors in machine shops, body shops, automobile prep/delivery areas, and plastics processing facilities. Using FISH EYE ELIMINATOR for oil-contaminated substrates is not a substitute for soaking, scrubbing and rinsing with HI-SPEED Cleaner/Degreaser. Most of the contamination should be removed using HI-SPEED.
MICA-FLAKE DECORATIVE CHIPS
PDS | MSDS
MICA-FLAKE DECORATIVE CHIPS are unique metallic flakes derived from a group of sheet silicate minerals. These mica minerals are then separated into sheet-like pieces and broken down into smaller, standardized flake sizes. MICA FLAKE DECORATIVE CHIPS are used with the MICA-FLEX E (epoxy) and MICA-FLEX M (MMA) flooring systems.
MICA-FLEX M
PDS | MSDS
MICA-FLEX M is 100% reactive fast curing high strength methyl methacrylate (MMA) based acrylic decorative flooring system. It is a nominal 1/16”(1.6 mm) overlay system composed of primer, a single broadcast of micro- or macro-sized natural mica flakes and topcoats. Surface finish can be smooth or slip resistant MICA-FLEX M utilizes unique MICA-FLAKE metallic flakes.
NO-SAG #1
PDS | MSDS
NO-SAG #1 is a dry powder designed to thicken ELAST-O-COAT while allowing it to remain flexible. The thickened epoxy is used to fill control joints where movement is expected. It is typically applied with a trowel or caulking gun.
NO-SAG #2
PDS | MSDS
NO-SAG #2 is a dry powder designed to thicken epoxies that require a higher viscosity, making it possible to apply onto a vertical surface. The thickened epoxy is easy to apply with a brush, trowel or squeegee.
POLY-CRETE COLOR-FAST
PDS | MSDS
POLY-CRETE COLOR-FAST is a 100% solids three component cementitious aliphatic urethane topcoat. POLY-CRETE COLOR-FAST can be used over POLY-CRETE TF as a thin film flooring system or as a topcoat for POLY-CRETE HF, POLY-CRETE MD, POLY-CRETE WR and as a grout coat for POLY-CRETE MDB and SLB systems. POLYCRETE COLOR-FAST preserves the performance and durability of cementitious urethane systems, while offering an aesthetic look that is UV stable. POLY-CRETE COLOR-FAST is designed to be fast curing and offer better stain resistance to food processing chemicals compared with traditional cementitious urethane systems.
POLY-CRETE HF
PDS | MSDS
POLY-CRETE HF is a 100% solids, aromatic, cementitious urethane system. It is a pigmented, trowel applied floor system. It is typically applied 1/4 -3/8 inch thick depending on design requirements. POLY-CRETE HF is designed to withstand aggressive chemical and thermal attack while providing abrasion resistance. An optional, integral cove base is available.
POLY-CRETE MD
PDS | MSDS
POLY-CRETE MD is a 100% solids, aromatic, cementitious urethane system blended with graded silica and fine fillers applied at 3/16 to 1/4 inch to produce a self-leveling matte finish of uniform color.
POLY-CRETE MDB
PDS | MSDS
POLY-CRETE MDB is a 100% solids aromatic cementitious urethane system with a broadcast aggregate. This system is typically installed at a nominal ¼ inch thickness. POLY-CRETE MDB uses a natural quartz aggregate. A topcoat of DUR-A-FLEX epoxy, urethane or methyl methacrylate is applied depending on performance requirements.
POLY-CRETE MDC
PDS | MSDS
POLY-CRETE MDC is a 100% solids aromatic cementitious urethane system with a vinyl chip broadcast. This system is installed at 3/16 – ¼ inch thickness. This should be determined by service, cleaning temperatures, severity of traffic, point impact and loadings. POLY-CRETE MDC uses Macro or Micro colored chips and is top coated with DUR-A-FLEX epoxy, urethane or methyl methacrylate depending on performance requirements.
POLY-CRETE MDQ
PDS | MSDS
POLY-CRETE MDQ is a 100% solids aromatic cementitious urethane system with decorative quartz broadcast. The system is typically installed at a nominal ¼ inch thickness. This should be determined by service, cleaning temperatures, severity of traffic, point impact and loadings. POLY-CRETE MDQ uses colored or blended decorative quartz aggregate. A topcoat of Dur-A-FLEX epoxy, urethane, or methyl methacrylate is applied depending on performance requirements.
POLY-CRETE SL
PDS | MSDS
POLY-CRETE SL is a 100% solids, aromatic, cementitious urethane system blended with graded silica and fine fillers applied at 1/8 inch to produce a self-leveling matte finish. In approved applications, POLY-CRETE SL may be used as a moisture mitigating underlayment for resilient flooring products. Contact the Dur-A-Flex Technical Department for more information.
POLY-CRETE SLB
PDS | MSDS
POLY-CRETE SLB (self leveling broadcast) is a 100% solids aromatic cementitious urethane system with a quartz aggregate broadcast. This system is typically installed at a nominal thickness of 3/16 inches. This should be determined by service, cleaning temperatures, severity of traffic, point impact and loadings. A topcoat(s) of DUR-A-FLEX epoxy, urethane or methyl methacrylate is used depending on performance requirements.
POLY-CRETE SLC
PDS | MSDS
POLY-CRETE SLC (self leveling chip) is a 100% solids aromatic cementitious urethane system with decorative chip broadcast. The system is typically installed at a nominal thickness of 3/16 inch. This should be determined by service, cleaning temperatures, severity of traffic, point impact and loadings. POLYCRETE SLC uses colored chips and is top coated with DUR-A-FLEX epoxy, urethane or methyl methacrylate depending on performance requirements.
POLY-CRETE TF
PDS | MSDS
POLY-CRETE TF is a solvent free, high build coating based upon polyurethane technology. Although it is designed as a topcoat and primer for POLY-CRETE WR and POLY-CRETE HF, it should also be used as a topcoat for POLY-CRETE MDB and SLB systems.
POLY-CRETE TF COVE HARDENER
PDS | MSDS
POLY-CRETE TF COVE HARDENER was specifically designed for vertical applications where extra sag resistance is required. Upon mixing, the viscosity drops significantly which makes mixing and handling easy. However, when the mixing blade is removed the viscosity rises once again. This added viscosity makes cove work easier and more efficiently, while maintaining the toughness and chemical resistance found in POLYCRETE TF.
POLY-CRETE WR
PDS | MSDS
POLY-CRETE WR is an aggregate filled, trowel applied cove system based upon a liquid polyurethane resin. It is designed specifically for use with POLY-CRETE HF and POLY-CRETE MD polyurethane flooring in order to maintain the same standards of resistance to abrasion and chemical contact.
SHOP FLOOR
PDS | MSDS
SHOP FLOOR Epoxy Flooring is a combination of pigmented DUR-A-GLAZE SHOP FLOOR, a 100% solids epoxy and Flintshot, a natural quartz sand. The epoxy and the quartz aggregate are fused together during application into a monolithic surface that is extremely durable, thickness ranges from 1/16″- 1/4″. SHOP FLOOR Epoxy Flooring is similar in application technique, durability and chemical resistance to the time tested DUR-A-QUARTZ Epoxy Flooring. It is available in three different textures; standard non-skid, orange peel and smooth.
SHOP FLOOR MR
PDS | MSDS
SHOP FLOOR MR Epoxy Flooring is a combination of ELAST-O-COAT waterproofing membrane, pigmented DUR-A-GLAZE SHOP FLOOR, a 100% solids epoxy and Flintshot, a natural quartz sand. It is ideal for mechanical room applications. The epoxy and the quartz aggregate are fused together during application into a monolithic surface that is extremely durable, thickness ranges from 1/16″- 1/4″. SHOP FLOOR MR Epoxy Flooring is similar in application technique, durability and chemical resistance to the time tested DUR-A-QUARTZ Epoxy Flooring. It is available in three different textures; standard non-skid, orange peel and smooth.
ULTRA CLEAR
PDS | MSDS
ULTRA-CLEAR is a clear, two component 100% solids, thermosetting epoxy designed specifically for the DUR-A-QUARTZ, and DUR-A-CHIP decorative flooring systems. ULTRA-CLEAR is the purest formulation of its kind in the DUR-A-FLEX line of epoxy products. ULTRA-CLEAR protects against UV rays and helps prevent the floor from ambering. ULTRA-CLEAR reinforces the visual depth and texture of the quartz and chip blends.
ULTRA CLEAR COVE REZ
PDS | MSDS
ULTRA CLEAR COVE-REZ resin is a thixotropic version of ULTRA CLEAR resin. This product was specifically designed for vertical applications where extra sag resistance is required. The viscosity drops significantly while mixing, which makes mixing and handling easy. When the mixing blade is removed the viscosity rises once again. This added viscosity makes cove work easier and more efficient, while maintaining the durability and chemical resistance found in DUR-A-GLAZE #4 “Regular” resin.
Q28 AND Q11 QUARTZ AGGREGATE
PDS | MSDS
Q-28 DUR-A-QUARTZ is a colored, naturally rounded, translucent quartz aggregate produced specially for seamless polymer flooring applications. The very hard quartz granules are sieved for a selected size range and colored with high quality pigments, which are ceramically bonded to the clear quartz surface. This special coloring process provides superior resistance to solvents, acids and chemicals used to formulate epoxies and other type binders. The translucence of the quartz allows the color from the back side of the granule to be reflected through the granule. If the surface color is worn off mechanically by traffic, this translucence allows the abraded granules to retain its color.
TIRE MARK REMOVER
PDS | MSDS
TIRE MARK REMOVER is a blend of special cleaning agents, surfactants and terpene solvents. It is a specially formulated cleaner designed to remove rubber skid marks from epoxy or other polymer-type floor systems without harming the floor’s surface. It also works great on steel trowelled concrete floors. Unlike other cleaners tough enough to take up rubber tire marks, it contains no petroleum solvents, making it safer to use and safe on polymer floors.
Systems
HYBRI-FLEX AC
PDS
HYBRI-FLEX AC is a 100% solids low odor decorative chip system. It is composed of a 1/8” POLY-CRETE MD SL body coat with a decorative chip broadcast; a DUR-A-GLAZE #4 broadcast coat, and two DUR-AGLAZE #5 topcoats yielding a total nominal system thickness of 3/16”.
HYBRI-FLEX AQ
PDS
HYBRI-FLEX AQ is a 100% solids low odor color quartz system composed of a 1/8” POLY-CRETE MD SL body coat with a decorative quartz broadcast. It uses a 1/16” DUR-AGLAZE #4 broadcast coat, and two DUR-A-GLAZE #5 topcoats yielding a total system thickness of 1/4”.
HYBRI-FLEX EC
PDS
HYBRI-FLEX EC is a decorative chip system composed of an 1/8” POLY-CRETE MD SL body coat with a decorative chip broadcast. It uses a DUR-A-GLAZE #4 broadcast coat, a DUR-A-GLAZE #4 grout coat, and an ARMOR TOP topcoat yielding a total nominal system thickness of 3/16”.
HYBRI-FLEX EQ
PDS
HYBRI-FLEX EQ is a 100% solids low odor color quartz system composed of a 1/8” POLY-CRETE MD SL body coat with a decorative quartz broadcast. It uses a DUR-A-GLAZE #4 broadcast coat, DUR-A-GLAZE #4 grout coat, and an ARMOR TOP topcoat yielding a total nominal system thickness of 1/4”.
HYBRI-FLEX ES
PDS
HYBRI-FLEX ES is a 100% solids low odor, smooth, solid color system; composed of a 5 mil POLY-CRETE TF primer, 1/8” POLY-CRETE MD SL body coat with F-70 quartz broadcast, 60 mil DUR-A-GARD S/L topcoat, and a 3 mil ARMOR TOP topcoat yielding a total nominal system thickness of 190 mils.
HYBRI-FLEX EB
PDS
HYBRI-FLEX EB is a solid color, natural quartz system composed of a 1/8” POLY-CRETE MD SL body coat with a natural quartz broadcast. It uses a DUR-A-GLAZE #4 broadcast coat, a SHOPFLOOR grout coat, and either a pigmented POLY-THANE #2 HIGH SOLIDS with ADD-ACOLOR #4, or ARMOR TOP topcoat yielding a total nominal system thickness of 1/4”.
HYBRI-FLEX MB
PDS
HYBRI-FLEX MB is a 100% solids quartz system composed of a 1/8” POLY-CRETE MD SL body coat with a natural quartz broadcast. It uses a 16 mil CRYL-A-GLAZE G201 pigmented broadcast coat, and two 16 mil CRYL-A-TOP T301 pigmented topcoats yielding a total nominal system thickness of 1/4”.
HYBRI-FLEX MC
PDS
HYBRI-FLEX MC is a 100% solids decorative chip system composed of a 1/8” POLY-CRETE MD SL body coat with a decorative chip broadcast. It uses a 16 mil CRYL-A-GLAZE G201 broadcast coat, and two 16 mil CRYL-A-TOP T301 topcoats yielding a total nominal system thickness of 3/16”.
HYBRI-FLEX MQ
PDS
HYBRI-FLEX MQ is a 100% solids, color quartz system composed of a 1/8” POLY-CRETE MD SL body coat with a decorative quartz broadcast. It uses a 16 mil CRYL-A-GLAZE G201 broadcast coat, and two 16 mil CRYL-A-TOP T301 topcoats yielding a nominal system thickness of 1/4”.
