ACO

 

Klassik Drain

---

The world’s most popular general purpose trench drain system is available with a wide variety of grates in different materials, slot configurations, and load ratings. Grates are secured into the channel by ACO’s patented boltless locking device – QuickLok. KlassikDrain’s interconnecting polymer concrete channels feature an integrally cast-in galvanized (K100S) or stainless steel wearing edge rail (KS100S), and come in sloped and neutral depths. A full range of accessories completes the system.

Typical applications

• Parking lots & Garages
• Shopping malss
• Pedestrian Areas
• Light industrial areas
• Commercial areas
• Internal applications

 

Klassik Drain – Features:

---

Wide choice of grates in various materials and sytles (including ADA compliant) for applications from Load Class A to Load Class E

 

QuickLok – patented, boltless locking system provides quick fitting and removal of grates. Helps reduce installation / maintenance time and cost

Sloped (0.6%) channel units –
meter long units provide 98′-5″ continuous slope. Neutral units can be used to extend run lengths.

 

Integrally cast-in galvanized steel edge rail provides additional strength and protects channel body from damage. (Stainless steel edge rail also available – KS100S)

Polymer concrete – a durable, yet lightweight material made from polyester resin binder reinforced by mineral aggregates and fillers. It provides up to four times the compressive strength of cement concrete.

Profiled side walls – strengthening pillars and frost keys provide channel body strength and mechanical keying to surrounding concrete.

Direction arrows
on the sides of the channel indicate flow direction and ensure channels are installed correctly.

Bottom drill-outs are included on all channel units to allow vertical evacuation of the system along the run. Schedule 40 drill outs are sized for 4″ and 6″ pipes. Note: for 6″ pipes, an oval to round adaptor is required (Part No. 95140).
Interconnecting end profiles allow easy and effective joining of channels. Appropriate sealant can be used to create a sealed joint

4″ internal width trench system – meter (39.37″) and half meter (19.69″) channel. ‘U’ shaped bottom improves flow hydraulics.

Notes:
1. Preformed 4″ dia. & 6″ flumed drill-out outlet cast on underside of every channel
2. Closing cap can be cut down to suit all channels

 

KS100S

---

KS100S is the KlassikDrain K100S system, which has the integrally cast-in galvanized steel rail replaced by a stainless steel edge rail. KS100S is used for high profile applications, or where increased corrosion resistance is required – but Vinyl ester polymer concrete is not necessary.

ACO recommends the use of non-galvanized steel grates with KS100S to avoid galvanic corrosion (where galvanized steel reacts with stainless steel).

Loading is determined by grate, up to Load Class E.
Meeter Channels
0.6% sloped channels in meter lengths and 30 depths which connect to create 30 meter (98′-5″) continuously sloping run. Neutral channels available in 4 depths. Can be used to create non-sloped runs, or inserted in sloped runs to increase length

Closing/4″ inlet/outlet cap
Fits all channels. Manufactured from gray ABS to complement edge rail. Guides aid cutting to correct height. 4″ bell end connection to Schedule 40 pipe. Seal using PVC-ABS cement. Note: For depth 1-10 channels ACO recommends removal of bell end to ensure adequate pavement material coverage.

 

Series 600 catch basins
Catch basins with 4″, 6″ and 8″ drill-outs for pipe connection. Supplied complete with grate. Available with plastic trash bucket or filter bag. Riser unit fits between top and bottom unit. Options include a choice of deep or short bases. Any channel can be connected into the catch basin by removing the end wall to the correct height. Drill-outs guide connection to channels 5, 10, 15, 20, 25

 

K900 catch basin
In-line catch basin with 4″ and 6″ drill-outs for pipe connection. Available with plastic trash bucket. Options include in-line or side foul air trap. Any channel can be connected into the catch basin by removing the end wall to the correct height. Drill-outs guide connection to channels 5, 10, 15, 20, 25 and 30.

6″ Sch. 40 outlet caps
6″ Schedule 40 plain end pipe, polypropylene oval to round adaptor cast into polymer concrete end cap, available in two heights. Solvent weld to coupler. Note: These end caps cannot be cut to height, and fit only at positions shown in layout diagram

6″ Sch. 40 inlet caps
6″ Schedule 40 plain end pipe, polypropylene oval to round adaptor cast into polymer concrete end cap, available in two heights. Solvent weld to coupler. Note: These end caps cannot be cut to height, and fit only at positions shown in layout diagram.

 

K100S Parts List

---

Description

Part

Invert Depth

Overall Depth

Weight

No.

inches

mm

inches

mm

lbs

Female

Male

Female

Male

Female

Male

Female

Male

K01 Neutral channel – 39.37” (1m) K0013 Neutral channel – 19.69” (0.5m) K1 Sloped channel – 39.37” (1m) K2 Sloped channel – 39.37” (1m) K3 Sloped channel – 39.37” (1m) K4 Sloped channel – 39.37” (1m) K5 Sloped channel – 39.37” (1m) K6 Sloped channel – 39.37” (1m) K7 Sloped channel – 39.37” (1m) K8 Sloped channel – 39.37” (1m) K9 Sloped channel – 39.37” (1m) K10 Sloped channel – 39.37” (1m) K010 Neutral channel – 39.37” (1m) K0103 Neutral channel – 19.69” (0.5m) K11 Sloped channel – 39.37” (1m) K12 Sloped channel – 39.37” (1m) K13 Sloped channel – 39.37” (1m) K14 Sloped channel – 39.37” (1m) K15 Sloped channel – 39.37” (1m) K16 Sloped channel – 39.37” (1m) K17 Sloped channel – 39.37” (1m) K18 Sloped channel – 39.37” (1m) K19 Sloped channel – 39.37” (1m) K20 Sloped channel – 39.37” (1m) K020 Neutral channel – 39.37” (1m) K0203 Neutral channel – 19.69” (0.5m) K21 Sloped channel – 39.37” (1m) K22 Sloped channel – 39.37” (1m) K23 Sloped channel – 39.37” (1m) K24 Sloped channel – 39.37” (1m) K25 Sloped channel – 39.37” (1m) K26 Sloped channel – 39.37” (1m) K27 Sloped channel – 39.37” (1m) K28 Sloped channel – 39.37” (1m) K29 Sloped channel – 39.37” (1m) K30 Sloped channel – 39.37” (1m) K030 Neutral channel – 39.37” (1m) K0303 Neutral channel – 19.69” (0.5m)

04040 04035 04041 04042 04043 04044 04045 04046 04047 04048 04049 04050 99272 99281 04051 04052 04053 04054 04055 04056 04057 04058 04059 04060 99295 99304 04061 04062 04063 04064 04065 04066 04067 04068 04069 04070 99317 99328

4.60 4.60 4.60 4.84 5.07 5.31 5.55 5.78 6.02 6.25 6.49 6.73 6.96 6.96 6.96 7.20 7.44 7.68 7.92 8.14 8.38 8.62 8.86 9.09 9.33 9.33 9.33 9.56 9.80 10.04 10.27 10.51 10.74 10.98 11.22 11.45 11.69 11.69

4.60 4.60 4.84 5.07 5.31 5.55 5.78 6.02 6.25 6.49 6.73 6.96 6.96 6.96 7.20 7.44 7.68 7.92 8.14 8.38 8.62 8.86 9.09 9.33 9.33 9.33 9.56 9.80 10.04 10.27 10.51 10.74 10.98 11.22 11.45 11.69 11.69 11.69

117 117 117 123 129 135 141 147 153 159 165 171 177 177 177 183 189 195 201 207 213 219 225 231 237 237 237 243 249 255 261 267 273 279 285 291 297 297

117 117 123 129 135 141 147 153 159 165 171 177 177 177 183 189 195 201 207 213 219 225 231 237 237 237 243 249 255 261 267 273 279 285 291 297 297 297

5.47 5.47 5.47 5.70 5.94 6.18 6.41 6.65 6.88 7.12 7.36 7.59 7.83 7.83 7.83 8.07 8.31 8.54 8.78 9.01 9.25 9.48 9.72 9.96 10.19 10.19 10.19 10.43 10.66 10.90 11.14 11.38 11.61 11.85 12.08 12.32 12.55 12.55

5.47 5.47 5.70 5.94 6.18 6.41 6.65 6.88 7.12 7.36 7.59 7.83 7.83 7.83 8.07 8.31 8.54 8.78 9.01 9.25 9.48 9.72 9.96 10.19 10.19 10.19 10.43 10.66 10.90 11.14 11.38 11.61 11.85 12.08 12.32 12.55 12.55 12.55

139 139 139 145 151 157 163 169 175 181 187 193 199 199 199 205 211 217 223 229 235 241 247 253 259 259 259 265 271 277 283 289 295 301 307 313 319 319

139 139 145 151 157 163 169 175 181 187 193 199 199 199 205 211 217 223 229 235 241 247 253 259 259 259 265 271 277 283 289 295 301 307 313 319 319 319

27.6 16.5 28.4 29.3 30.1 30.9 31.8 32.6 33.5 34.3 35.1 35.7 36.8 20.5 37.6 38.5 39.3 40.1 41.0 41.8 42.7 43.5 44.3 45.2 46.0 24.5 46.8 47.7 48.5 49.3 50.2 51.0 51.9 52.7 53.5 54.4 55.8 29.0

 

In-line Catch Basins

K900 In-line catch basin – 19.69” (0.5m) K900 QuickLok bar (removable) Series 900 plastic trash bucket Foul air trap (PP)

96504 98717 01498 90854

24.00 – – –

24.00 – – –

610 – – –

610 – – –

25.00 – 9.33 –

25.00 – 9.33 –

635 – 237 –

635 – 237 –

71.2 0.1 1.1 1.2

 

Accessories

Universal ABS closing/4” inlet/outlet cap K204-6 6” inlet cap (PP) K208-6 6” outlet cap (PP) K304-6 6” inlet cap (PP) K308-6 6” outlet cap (PP) Type 824 6″ Sch. 40 oval-to-round PVC outlet QuickLok locking bar QuickLok/PowerLok grate removal tool

96825 97153 97212 97126 97188 95140 02899 01318

– – 9.33 – 11.69 – – –

– 9.33 – 11.69 – – – –

– – 237 – 297 – – –

– 237 – 297 – – – –

12.55 – 10.19 – 12.55 – – –

12.55 10.19 – 12.55 – – – –

319 – 259 – 319 – – –

319 259 – 319 – – – –

0.4 2.5 3.9 3.3 4.9 1.1 0.1 0.3

Notes:
1. Preformed 4″ dia. & 6″ flumed drill-out outlet cast on underside of every channel
2. Closing cap can be cut down to suit all channels