Wall Coatings 04/2016

By dciflooringUncategorized

DUR-A-WALL/DUR-A-WALL FGR

Dur-A-Wall and Dur-A-Wall FGR Epoxy Wall Systems are 100% epoxy solid, pigmented, two component, low odor, 100% thermosetting epoxy formulations. Dur-A-Wall FGR uses the same epoxy system as the Dur-A-Wall system but incorporates a fiberglass mat designed especially for sheet rock wall applications. Dur-A-Wall is ideally suited for application on concrete, wood, drywall, cement board, or block. This coating is extremely durable, sanitary, and easy to clean.

Benefits 

  • Stain Resistant
  • Durable
  • Easy to Clean
  • Sanitary
  • Stain Resistant
  • Durable
  • Easy to Clean
  • Sanitary
  • Seamless
  • Easy
  • Maintenance

 

Typical Uses

  •  Laboratories
  • Hospitals
  • Walk-In Coolers
  • Laundries
  • Pharmaceutical Plants
  • Kennels
  • Food Processing Plants
  • Bottling Plants
  • Commercial Kitchens
  • Garages
  • Clean Rooms
  • Warehouses
  • Car Wash Bays
  • Schools
  • Locker Rooms

 

Technical Information 
 

Hardness, Shore D                                                 70-80
Water Absorption                                                   0.04%
Flammability                                                          Self-Extinguishing
Flame Spread/NFPA-101                                      Class A
Tensile Strength                                                     3000 psi
Flexural Strength                                                    4000 psi
Non-toxic                                                             USDA approved
VOC Content                                                           42.49 g/l
untitled

DUR-A-WALL VC

Dur-A-Wall VC decorative epoxy wall system is a two-component, low odor, 100% thermosetting formulation of Dur-A-Guard (pigmented) epoxy, Dur-A-Glaze #4 (clear) epoxy and decorative chip that is designed especially for wall applications. Dur-A-Wall VC is ideally suited for application on concrete, wood, drywall, or block. This system is seamless, extremely, durable, sanitary, and easy to clean.

Benefits

  • Stain Resistant
  • Sanitary
  • Easy to clean
  • Easy maintenance
  • Durable
  • Seamless

 

Typical Uses 

  • Laboratories
  • Hospitals
  • Clean rooms
  • Laundries
  • Pharmaceutical Plants
  • Kennels
  • Food Processing Plants
  • Bottling Plants
  • Commercial Kitchens
  • Garages
  • Locker Room Areas
  • Schools

 

Technical Information

 
Hardness, Shore D                                  70-80
Water Absorption                                     0.04%
Flammability                                            Self-Extinguishing
Flame Spread/NFPA-101                        Class A
Tensile Strength                                      3000 psi
Flexural Strength                                     4000 psi
VOC Content                                           0 g/l
Toxicity                                                    Non-toxic, USDA approved

SANIFIBER

Sanifiber is a fiber reinforced epoxy resin system designed for application to walls and ceilings in demanding environments such as food processing and pharmaceutical facilities. This unique resin combines the toughness expected of a fiber reinforced epoxy with the ease of application using a brush, roller or spray. The Sanifiber system provides excellent performance properties including light (UV) resistance not typical of epoxy based systems.
Sanifiber

Benefits

  • Light stipple texture
  • Easy to apply using brush, roller, or spray
  • Highly washable surface
  • Impact resistant
  • Color stable
  • Resists cracking
  • Chemical Resistant
  • Acceptable for use in USDA inspected facilities

 

Typical Uses

  • Commercial kitchens and service corridors
  • Pharmaceutical facilities and laboratories
  • Healthcare and clean rooms
  • Animal holding
  • Food and beverage facilities
  • Locker rooms and restrooms
  • Packaging and storage areas
  • Cage and skid wash areas

 

Technical Information

Color                                                               White only
Hardness, Shore D                                      75/70
Flammability                                                Self-Extinguishing
Tensile Strength                                           3,000 psi
Adhesion                                                        300 psi

System types       

Primer
Body Coat/Intermediate Coat
Topcoat
Finish Coat

SANIFLAKE 

Saniflake is a unique wall system consisting of water based epoxy resins and small multi-color color flakes to enhance design options while maintaining ease of cleaning and chemical resistance properties. This system is ideal for new construction but can be used to beautify existing painted surfaces, the slight texture provided from the small flakes disguises imperfections found in distressed wall surfaces.
Saniflake

Benefits

  • Seamless
  • Easy to apply using brush, roller, or spray
  • Highly washable surface
  • Aesthetically pleasing appearance
  • Color stable
  • Chemical resistant
  • Acceptable for use in USDA inspected facilities

 

Typical Uses

  • Commercial kitchens and service corridors
  • Pharmaceutical facilities and laboratories
  • Healthcare and clean rooms
  • Animal care and animal holding facilities
  • Food and beverage facilities
  • Locker rooms and restrooms
  • Cage and skid wash areas

 

Technical Information 

Hardness, Shore D                                              70
Tensile Strength                                                   3,000 psi
Adhesion                                                                300 psi
Flammability                                                        Self-Extinguishing

SANIGLASS I

Saniglass I Fiberglass Reinforced Wall and Ceiling System is a multi-layer, high build wall and ceiling surfacing systems utilizing an epoxy base coat with fiberglass mesh reinforcement added for dimensional stability and greater durability. The system utilizes a UV stable, chemical resistant finish coat.
Saniglass I

Benefits:

  • Smooth and durable
  • Highly washable surface
  • Fiberglass reinforced for maximum tensile strength
  • Available with an antimicrobial agent

 

Typical Uses:

  • Commercial kitchens and service corridors
  • Pharmaceutical facilities and laboratories
  • Healthcare and clean rooms
  • Animal holding
  • Food and beverage facilities
  • Locker rooms, showers and restrooms
  • Packaging and storage areas
  • Cage and skid wash areas

 

Technical Information:

Hardness, Shore D                              65/60
Tensile Strength                                   9,000 psi
Adhesion                                                300 psi
Flammability                                         Self-Extinguishing

SANIGLASS II

SANIGLASS II Fiberglass Mat Reinforced Wall and Ceiling System is a multi-layer, high build wall and ceiling surfacing systems utilizing an epoxy base coat with fiberglass veil reinforcement added for dimenionsal stability, strength and greater durability. The system utilizes a UV stable, chemical resistant finish coat.
Saniglass II

Benefits

  • Smooth and durable
  • Highly washable surface
  • Fiberglass reinforced for maximum tensile strength
  • Low VOC
  • Low odor permits installation during normal working hours

 

Typical Areas of Use

  • Commercial kitchens and service corridors
  • Pharmaceutical facilities and laboratories
  • Healthcare and clean rooms
  • Animal holding
  • Food and beverage facilities
  • Locker rooms, showers and restrooms
  • Packaging and storage areas
  • Cage and skid wash areas

 

Technical Information 

Color                                                White
Hardness, Shore D                       65/60
Tensile Strength                            9,000 psi
Adhesion                                         300 psi
Flammability                                  Self-Extinguishing

FINAL TOPCOAT POLYURETHANE GLOSS/MATTE

Final Topcoat Polyurethane Gloss/Matte resin is a unique, environmentally friendly, water-based, breathable, aliphatic urethane available gloss, clear and/or tinted that provides the performance characteristics of solvent-based systems with the ease of application associated with water-based systems.

 

Benefits:

  • Gloss finish
  • Acceptable for use in USDA inspected facilities
  • Color matching at local SW store
  • Environmentally friendly formulation
  • Breathable
  • UV stable
  • Water-based
  • Long working time
  • Good chemical resistance
  • Resists common acids, fuels, grease, salt, and Skydrol

 

Typical Uses:

  • Hangars
  • Light manufacturing
  • Garages
  • Auto service areas

 

Technical Information

Color                                         Clear and tint bases
Mix Ratio                                 3:1
Volume Solids                        55% + 2% mixed
Weight Solids                         62% + 2% mixed
VOC (EPA Method 24)        50g/L mixed; 0.41 lb/gal
Share Button