Overlay Finishes For Slip Resistance

By dciflooringUncategorized

Slip resistant epoxy flooring and other coatings are required by most facilities, and with good reason. Virtually all spaces, both commercial and industrial, are susceptible to the high risks of a wet and slick floor. Our slip resistant flooring and coatings come in a variety of finishes, from the very mild to coarser textures, and are installed according to your specific needs-from rainwater to oil and jet fuel, our flooring can provide a high measure of protection against dangerous conditions.




 Areas of Use

Hospitals and Clinics
Schools and Universities
Retail and Grocery Stores
Vehicle maintenance bays
Veterinary and animal facilities
Aviation and Aerospace Hangars
Airports and other transport terminals
Food and beverage processing plants
Correctional facilities and Penitentiaries
Electronics, semi-conductor and avionics facilities
Manufacturing, assembly and packaging operations
Laboratories and Pharmaceutical Production Facilities
Restaurants, Hotels, Casinos and other hospitality locations
f82bcf2b-f67b-44e7-bb43-14c36f2bb49e             2b193e36-3c63-47bc-b621-028d72988b66
Surfaces that are frequently wet, dangerous, or inconvenient if slippery are often given special treatment to ensure a non-slip finish. These finishes can be achieved by hand tool techniques, by sawing, by applying an abrasive aggregate, with epoxy urethane. Troweling is the easiest way to obtain a non-slip surface, but it is probably the least durable.
Depending upon the degree of slip resistance required this method might consist of merely discontinuing troweling after a wood floating operation to produce a gritty surface or swirl troweling to raise ridges on the concrete surface. Where foot traffic is to be heavy or for industrial vehicle applications, it has been found advisable to use abrasive grains in the surface of concrete to provide a long lasting non-slip surface.

OLYMPUS DIGITAL CAMERA              Topcoat-3


Share Button