Sika – Urethane Cements,Epoxies, & Caulking

Joint Fillers

Sikaflex -1A

PDS | MSDS

Description:

A premium-grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant. Meets Federal specification TT-S-00230C, Type II, Class A. Meets ASTM C-920, Type S, Grade NS, Class 35, use T, NT, O, M, G, I; Canadian standard CAN/CGSB 19.13-M87.

Where to Use:

Designed for all types of joints where maximum depth of sealant will not exceed 1/2 in.
Excellent for small joints and fillets, windows, door frames, reglets, flashing, common roofing detail applications, and many construction adhesive applications.
Suitable for vertical and horizontal joints; readily placeable at 40°F.
Has many applications as an elastic adhesive between materials with dissimilar coefficients of expansion.
Submerged conditions, such as canal and reservoir joints.

Advantages:

Eliminates time, effort, and equipment for mixing, filling cartridges, pre-heating or thawing, and cleaning
of equipment.
Fast tack-free and final cure times.
High elasticity – cures to a tough, durable, flexible consistency with exceptional cut and tear-resistance.
Stress relaxation.
Excellent adhesion – bonds to most construction materials without a primer.
Excellent resistance to aging, weathering.
Proven in tough climates around the world.
Odorless, non-staining.
Jet fuel resistant.
Certified to the NSF/ANSI Standard 61 for potable water.
Urethane-based; suggested by EPA for radon reduction.
Paintable with water-, oil- and rubber-based paints.
Capable of ±35% joint movement.

Sikaflex -1c SL

PDS | MSDS

Description:

Single component, self-leveling, premium-grade polyurethane sealant with an accelerated curing capacity.

Where to Use:

Sikaflex-1C SL is used to seal horizontal expansion joints in concrete and cementitious slabs such as:

Sidewalks
Balconies
Pavements
Terraces
Warehouses
Factories
Civil Structures
Plazas
Pitch Pans

Characteristics and Advantages:

1-component, no mixing
Self-leveling, pourable
Accelerated curing
Permanently elastic
High durability
Resists aging, weathering
Excellent adhesion
Convenient, easy-to-use packaging
Jet fuel resistant

Color: Limestone

Sikaflex -2c SL

PDS | MSDS

Description:

Sikaflex-2c SL is a 2-component, premium-grade, polyurethane-based, elastomeric sealant. It is principally a chemical cure in a self-leveling consistency. Meets ASTM C-920, Type M, Grade P, Class 25, use T, NT, M, G, A, O, I and Federal Specification TT-S-00227E, Type 1, Class A.

Where to Use:

Intended for use in all properly designed working joints with a minimum depth of 1/4 inch.
Ideal for horizontal applications.
Placeable at temperatures as low as 40°F.
Adheres to most substrates commonly found in construction.
Submerged conditions, such as canal and reservoir joints.

Characteristics and Advantages:

True self-leveling properties.
Capable of ±50% joint movement.
Chemical cure allows the sealant to be placed in non-moving joints exceeding 1/2 in. in depth.
High elasticity with a tough, durable, flexible consistency.
Exceptional cut and tear resistance.
Exceptional adhesion to most substrates without priming.
Available in 35 architectural colors.
Color uniformity assured via Color-pak system.
Available in pre-pigmented Limestone Gray (no Color-pak needed).
Self-leveling consistency, easy to apply in horizontal joints.
Easy to mix.
Paintable with water-, oil-, and rubber-base paints.
Jet fuel resistant.
No color-pak needed in pre-pigmented Limestone.

Sikaflex -2C NS

PDS | MSDS

Description:

A 2-component, premium-grade, polyurethane-based, elastomeric sealant. It is principally a chemical cure in a non-sag consistency. Meets ASTM C-920, Type M, Grade NS, Class 25, use T, NT, M, G, A, O, I and Federal Specification TT-S-00227E, Type II, Class A. Tested in accordance with ASTM C-1382 for use in EIFS systems.

Where to Use:

Intended for use in all properly designed working joints with a minimum depth of 1/4 inch.
Ideal for vertical and horizontal applications.
Placeable at temperatures as low as 40°F.
Adheres to most substrates commonly found in construction.
An effective sealant for use in Exterior Insulation Finish Systems (EIFS).
Submerged environments, such as canal and reservoir joints.

Advantages:

Capable of ±50% joint movement.
Chemical cure allows the sealant to be placed in joints exceeding 1/2 in. in depth.
High elasticity with a tough, durable, flexible consistency.
Exceptional cut and tear resistance.
Exceptional adhesion to most substrates without priming.
Available in 35 architectural colors.
Color uniformity assured via Color-pak system.
Available in pre-pigmented Limestone Gray (no Color-pak needed).
Non-sag even in wide joints.
Easy to mix.
Paintable with water-, oil-, and rubber-base paints.
Jet fuel resistant.

Sikaflex -2C NS EZ Mix

PDS | MSDS

Description:

A 2-component, premium-grade, polyurethane-based, elastomeric sealant. It is principally a chemical cure in a non-sag consistency. Meets ASTM C-920, Type M, Grade NS, Class 25, use T, NT, M, G, A, O and Federal Specification TT-S-00227E, Type II, Class A. Meets CAN/CGSB 19.24 – M90.

Where to Use:

Intended for use in all properly designed working joints with a minimum depth of ¼ inch.
Ideal for vertical and horizontal applications.
Placeable at temperatures as low as 40F.
Adheres to most substrates commonly found in construction.
An effective sealant for use in Exterior Insulation Finish Systems (EIFS).
Submerged environments, such as canal and reservoir joints.

Advantages:

Capable of +50% joint movement.
Chemical cure allows the sealant to be placed in joints exceeding ½ in. in depth.
High elasticity with a tough, durable, flexible consistency.
Exceptional cut and tear resistance.
Exceptional adhesion to most substrates without priming.
Available in 35 architectural colors.
Color uniformity assured via Color-pak system.
Available in pre-pigmented Limestone Gray (no Color-pak needed).
Non-sag even in wide joints.
Certified to the NSF/ANSI Standard 61 for potable water.
Easy to mix.
Paintable with water-, oil-, and rubber-base paints.
Jet fuel resistant.
Cold weather booster for initial tack (see reverse side for data).
Shore A hardness can be increased by using “TG” additive. See Sikaflex-2c NS TG data sheet for specific details.

Sikaflex -15 LM

PDS | MSDS

Description:

A low-modulus, high-performance, 1-component, polyurethane-based, non-sag elastomeric sealant. Meets Federal Specification TT-S-00230C, Type II, Class A; ASTM C-920, Type S, Grade NS, Class 100/50, use T, NT, G, A, O, M; Federal Specification for silicones – TT-S-001543 A, Type non-sag. Tested in accordance with ASTM C-1382 for use in EIFS systems.

Where to Use:

Excellent for moving joints in vertical applications.
Suitable for use between similar as well as dissimilar materials.
Typical applications include joints in concrete panel and wall systems, around window and door frames, reglets, flashing, common roofing detail applications, etc.
Exceptional sealant choice for high-rise and facade applications where high movement capability is required.
An effective sealant for use in Exterior Insulation Finish Systems (EIFS).

Advantages:

Low modulus of elasticity.
Easy and ready to use.
Eliminates time, effort, waste, and equipment clean-up.
Cures to a durable, flexible consistency.
Exceptional cut and tear resistance.
Stress relaxation properties.
Excellent adhesion.
Bonds to most construction materials without a primer.
Paintable with water-, oil- and rubber based paints.
Excellent resistance to aging, weathering.
Jet fuel resistant.
Proven in tough climates around the world.
Non-leaching.
Capable of +100% / -50% joint movement.
Two-hour UL fire rating when used with Ultra Block®.

Sikaflex Textured Sealant

PDS | MSDS

Description:

A moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant capable of ±25% joint movement. Meets Federal specification TT-S- 00230C, Type II. Meets ASTM C-920, Type S, Grade NS, Class 25.

Where to Use:

Designed for all types of joints where maximum depth of sealant will not exceed inch.
Suitable for vertical and horizontal joints; readily placeable at 40°F (4°C).
Has many applications as an elastic sealant between materials with dissimilar coefficients of expansion.

Ideal for:

Weatherproofing of joints between brickwork, blockwork, masonry, wood and concrete or metal frames.
Joints in walls, balconies, around window or door frames.
Expansion joints.

Epoxy

Sika Bonding Primer

PDS | MSDS

Description:

Rapid curing, water based primer consisting of two components: a prereacted epoxy resin dispersed in water (Part A), and a waterborne modified polyamine solution (Part B). In its wet mixed state, it is milky green and slightly viscous.

Where to Use:

Suitable for use on most sound substrate surfaces where both a penetrative and surface-lying
effect is required.

Advantages:

Fast cure allows same-day membrane application in most conditions.
Low odor, low VOC formulation.
Compatible with most common substrate materials (not for metal surfaces).

Sikafloor 81 EpoCem

PDS | MSDS

Description:

Three-component, solvent-free, odorless, moisture-insensitive, epoxymodified, cementitious self-leveling mortar. Especially formulated for leveling and structurally reprofiling on damp, “green” or saturated surface dry concrete slabs, and slabs with excess water vapor transmission rates for thicknesses of 100-160 mil (2.5-4 mm).

Where to Use:

As a Temporary Moisture Barrier (TMB) minimum 120 mils (3 mm thick) under Epoxy, Polyurethane and Methyl Methcrylate (MMA) resin floors, over high moisture content substrates; even green concrete. Note: Sikafloor 81 EpoCem must be sealed with a suitable Sikafloor epoxy primer system (e.g. Sikafloor 107, Sikafloor 160 and Sikafloor 161 at 16 mils) to form a long term vapor barrier. As a self-smoothing screed for:

Specifically formulated for leveling and structural reprofiling or patching horizontal
concrete surfaces, in new work or repairs
Floor topping on unventilated, damp substrates with no aesthetic requirements
Leveling layer under Epoxy, Polyurethane and MMA floor coatings /screeds, tiles, sheet floors, carpets or wooden floors
Repair and maintenance of monolithic concrete floors
Extend with oven-dried quartz sand as a patching and repair mortar

Advantages:

As a positive side vapor barrier prior to use with Sikafloor systems.
Economical structural resurfacing compound.
Water-based, solvent-free and odorless.
Self-leveling and good flowability.
Can be overcoated with epoxy resin compounds after 24 hrs [(68°F (20°C) at 50% relative ambient humidity]. Surface moisture measured with a Tramex® CME/CMExpert type concrete moisture meter must be < 4% prior to application of epoxy resin compound.
Waterproof yet permeable to water vapor.
Prevents osmotic blistering of resin based coatings over damp substrates
Fast curing and high early strengths.
Excellent adhesion to dry, damp, green or saturated surface dry concrete substrates.
Modulus of elasticity and coefficient of thermal expansion comparable to concrete.
Good adhesion after long-term water immersion in conjuction with suitable Sika coating system.
Contains no solvents.

Sikafloor 82 EpoCem

PDS | MSDS

Description:

Sikafloor 82 EpoCem is a three-component, solvent-free, odorless, moisture-insensitive, epoxy modified, cementitious, self-leveling mortar. Specifically formulated for leveling and structurally reprofiling on damp “green” or saturated surface dry concrete slabs for thickness of 160-280 mils (4-7 mm).

Where to Use:

As a self-leveling mortar for reprofiling and resurfacing concrete surface with thickness varying between 160 – 280 mils (4 – 7 mm). Note: Sikafloor 82 EpoCem must be sealed with a suitable Sikafloor epoxy primer system (e.g. Sikafloor 107, Sikafloor 160 and Sikafloor 161 at 16 mils) to form a long term vapor barrier. Leveling layer over Epoxy, Polyurethane and Methyl Methacrylate (MMA) floor coatings / screeds, tiles, sheet floors, carpet or wood floors.

Can be used as a patching and repair mortar for thickness of 1⁄4 – 8 in. (6 – 200 mm) when extended with oven-dried silica sand.

Advantages:

Economical, structural resurfacing compound.
Waterbased, solvent-free and odorless.
Self-leveling and good flowability.
Can be overcoated with epoxy resin compounds after 24 hrs [(68°F (20°C) at 50% relative ambient humidity]. Surface moisture measured with a Tramex® CME/CMExpert type moisture meter must be < 4% prior to application of epoxy resin compound.
Application possible on damp and “green”, cement based substrates.
Waterproof yet permeable to water vapor.
Fast curing and high early strengths.
Excellent adhesion to dry, damp and “green” or saturated surface dry concrete substrates.
Modulus of elasticity and coefficient of thermal expansion comparable to concrete.
Good adhesion after long-term water immersion in conjuction with suitable Sika coating system.
Contains no solvents.

Sikafloor 100 ESD

PDS | MSDS

Two-component epoxy resin conductive primer. It is designed for use in combination with Sikafloor 200C ESD, and Sikafloor 700 ESD when desiring resistance readings in the conductive range of 2.5 x 104 – 1.0 x 106 ohms.

Where to Use

Electronics
Data Processing
Military/Aerospace
Photographic, graphic arts
Hazard industries (dust or explosion hazards)

Sikafloor 105

PDS | MSDS

Description:

Two-component, penetrating high solids, light amber, epoxy-based primer/bond coat.

Use:

Designed for use as a primer/bond coat specifically in conjunction with Sikafloor Epo-Rok epoxy mortar system. Formulated to penetrate and reinforce the concrete substrate in addition to ensuring a tenacious bond between the Sikafloor Epo-Rok epoxy mortar and the concrete floor.

Advantages:

Excellent wetting properties.
Ensures good bond between substrate and Sikafloor Epo-Rok Mortar.
Improves trowelability of epoxy mortar.
Seals substrate, reducing the risk of pinholes.

Sikafloor 107

PDS | MSDS

Description:

Two component high solids, low modulus, low viscosity epoxy primer. This epoxy primer is specially formulated to form a tough flexible film.

Where to Use:

Designed as a primer for Sikafloor epoxy and urethane coatings as well as the broadcast and troweled systems. Sikafloor 107 should be considered where UV exposure is a concern

Advantages:

High solids, Low VOC’s
Low tensile modulus
Higher tensile elongation
Excellent penetration and adhesion
Easy to apply

Sikafloor 110

PDS | MSDS

Description:

A three-component, high solids epoxy concrete floor resurfacer. This product can be placed using a screed and finished by hand troweling or power troweling. Typical thickness is from 3/16” (4.8 mm) to 1/4” (6 mm).

Where to Use:

Designed for overlaying new and resurfacing worn concrete floors in light to heavy duty industrial applications. Sikafloor 110 is formulated to restore and protect concrete floors from impact and abrasive traffic.

Advantages:

Protects new concrete from abuse
Rejuvenates worn surfaces, to a smooth finish
Designed to take heavy loads
Formulated for easy application
Fast curing reduces downtime
Smooth and Slip resistant surface possible
(Optional) Use of EpoRok RB Aggregate will contain 30 % recycled Basalt, Pre-Consumer Recycled Material
Meets the qualifications for acquiring LEED point.

Sikafloor 160

PDS | MSDS

Description:

Where to Use:

Designed for overlaying new and resurfacing worn concrete floors in light to heavy duty industrial applications. Sikafloor 160 is formulated to restore and protect concrete floors from impact and abrasive traffic.

Advantages:

Protects new concrete from abuse
Rejuvenates worn surfaces, to a smooth finish
Designed to take heavy loads
Formulated for easy application
Fast curing reduces downtime
Smooth and Slip resistant surface possible
(Optional) Use of Sikadur-506 RC Type Aggregate which contains 30 % recycled Basalt, Pre-Consumer Recycled Material
Meets the qualifications for acquiring LEED point.

Sikafloor 160 PB

PDS | MSDS

Description:

Where to Use:

Advantages:

Protects new concrete from abuse
Rejuvenates worn surfaces, to a smooth finish
Designed to take heavy loads
Formulated for easy application
Fast curing reduces downtime
Smooth and Slip resistant surface possible
(Optional) Use of Sikadur-506 RC Type Aggregate which contains 30 % recycled Basalt, Pre-Consumer Recycled Material
Meets the qualifications for acquiring LEED point.

Sikafloor 161

PDS | MSDS

Description:

A two part, epoxy resin for priming and leveling mortars.

Where to Use:

Sikafloor 161 is designed as a primer for Sikafloor epoxy and urethane coatings, as well as for broadcast and troweled systems. When used as primer Sikafloor 161 can be considered where ≤ 4% moisture content by mass (pbw – part by weight) is measured on concrete substrate with Tramex® CME/CMExpert type concrete moisture meter.

Advantages:

Low VOC’s
Excellent penetration and adhesion
Easy application
Short Recoat Times
Multi-purpose use
100% solids as supplied

Sikafloor 200 ESD

PDS | MSDS

Description:

Sikafloor 200 ESD and Sikafloor 200C ESD coatings are a four-component ESD epoxy coating systems designed to impart electrostatic control properties to a variety of substrates in conjunction with ESD footwear, including existing non-conductive substrates. They are available in both a ANSI S20.20 compliant version and conductive resistance ranges to meet specific industry and DOD standards. Sikafloor 200 ESD will impart static dissipative resistance readings as a stand-alone topcoat atop a standard epoxy concrete primer such as Sikafloor 107, Sikafloor 161, Sikafloor 160, Sikafloor 1610 or over existing epoxy floors with an isolation layer of Sikafloor 264.

Where to Use:

Sikafloor 200 ESD can be used in almost any environment where the damaging effects of electrostatic discharge (ESD) cannot be tolerated. Industries currently using these coatings are:

Electronics
Data Processing
Military/Aerospace
Photographic, graphic arts
Hazard industries (dust or explosion hazards)

Advantages:

Consistent resistance measurements are obtained when testing in accordance with standard
methods.
Very low body voltage generation values possible when wearing heel straps C or SD footwear.
Conforms to ANSI S20.20, < 3.5 x 107 ohms when tested in accordance with ANSI STM 97.1
Available in conductive range (2.5 X 104 to 1.0 X 106) ohms per ANSI/ESD S7.1/ASTM F-150 when Sikafloor 200C ESD is used in conjunction with Sikafloor 220W Conductive or Sikafloor 100 ESD primer.
Sikafloor 200 ESD will impart static dissipative resistance readings as a stand-alone topcoat on top of a standard epoxy concrete primer such as Sikafloor 107, Sikafloor 160, Sikafloor 161 or Sikafloor 1610.
Maintains electrical conductivity throughout the entire thickness of the system.
Does not depend on relative humidity for conductive properties.
Tough, smooth, non-porous surface is easy to clean and maintain.
Good abrasion resistance.

Sikafloor 200C ESD

PDS | MSDS

Description:

Where to Use:

Sikafloor 200 ESD can be used in almost any environment where the damaging effects of electrostatic discharge (ESD) cannot be tolerated. Industries currently using these coatings are:

Electronics
Data Processing
Military/Aerospace
Photographic, graphic arts
Hazardous industries (dust or explosion hazards) (requires Sikafloor 220W Conductive or Sikafloor 100ESD and Sikafloor 700C ESD)

Advantages:

Consistent resistance measurements are obtained when testing in accordance with standard
methods.
Very low body voltage generation values possible when wearing heel straps C or SD footwear.
Conforms to ANSI S20.20, < 3.5 x 107 ohms when tested in accordance with ANSI STM 97.1
Available in conductive range (2.5 X 104 to 1.0 X 106) ohms per ANSI/ESD S7.1/ASTM F-150 when Sikafloor 200C ESD is used in conjunction with Sikafloor 220W Conductive or Sikafloor 100 ESD primer.
Sikafloor 200 ESD will impart static dissipative resistance readings as a stand-alone topcoat on top of a standard epoxy concrete primer such as Sikafloor 107, Sikafloor 160, Sikafloor 161 or Sikafloor 1610.
Maintains electrical conductivity throughout the entire thickness of the system.
Does not depend on relative humidity for conductive properties.
Tough, smooth, non-porous surface is easy to clean and maintain.
Good abrasion resistance.

Sikafloor 203

PDS | MSDS

Description:

A two component, high solids, epoxy resin for medium to heavy mil thickness applications.Can be used as a clear binder/coating/slurry or with a Sikafloor Epoxy Color Additive to achieve a variety of colors.

Where to Use:

Designed for one coat application from 12 to 20 mils to concrete floors subjected to abrasion and/ or chemical spills, where ease of cleaning, aesthetics and smoothness are a major consideration. Also used for slurry type applications from 60 to 120 mils.

Advantages:

High Solids / Low Odor
Medium to High Build in one coat application
High gloss and good clarity/color retention
Good chemical and abrasion resistance
Wide range of colors with Sikafloor Epoxy Color Additive
Durable, impermeable and seamless

Sikafloor 203 W

PDS

Description:

A two component, high solids, epoxy resin for medium to heavy mil thickness applications. Can be used as a clear binder/coating/slurry or with a Sikafloor Epoxy Color Additive to achieve a variety of colors.

Where to Use:

Advantages:

High Solids / Low Odor
Medium to High Build in one coat application
High gloss and good clarity/color retention
Good chemical and abrasion resistance
Wide range of colors with Sikafloor Epoxy Color Additive
Durable, impermeable and seamless

Sikafloor 207

PDS | MSDS

Description:

A general service, two component, high solids, epoxy system for use as a coating or as a binder for pigmented slurry/broadcast system and applied as a pigmented epoxy sealer coat.

Where to Use:

Designed for economical body and/or sealer coat application in Sikafloor Industrial Flooring systems from 5 to 10 mils (0.13 – 0.25 mm) w.f.t. subjected to abrasion and/or chemical spills. A binder for slurry-type applications (60 to 120 mils).

Advantages:

High Solids / Low Odor
Medium to High Build (i.e. as a coating or as a self-leveling slurry) in one application.
Good chemical and abrasion resistance
Wide range of colors with Sikafloor Epoxy Color Additive
Tough, smooth, non-porous surface is easy to clean

Sikafloor 215

PDS | MSDS

Description:

A two component high solids, low viscosity, clear epoxy resin designed for low to medium mil thickness application. Sikafloor 215 is available in clear or with Sikafloor Epoxy ColorAdditive to achieve a variety of colors.

Where to Use:

Sikafloor 215 can be used as a grout coat, top coat, slurry and as a binder in a Sikafloor decorative color quartz or flake system. A binder for slurry-type applications (60 to 120 mils).

Advantages:

High Solids
Water clear, high gloss
Versatility
Good abrasion and chemical resistance
Tough, smooth, non-porous surface is easy to clean
Durable, Impermeable and seamless

Sikafloor 216

PDS | MSDS

Description:

A low odor, 100% solids, epoxy resin coating system primarily designed for high build coatings, decorative quartz and decorative flake applications. Sikafloor 216 may be used as a primer and may be applied clear or pigmented using Sikafloor Epoxy Color Additives.

Where to Use:

Sikafloor 216 is ideal as a broadcast clear, low odor top coat or intermediate coat over decorative quartz or vinyl flake floor broadcast systems. Sikafloor 216 is also a field pigmentable product. Sikafloor 216 clear and/or pigmented can also be top coated with an aliphatic urethane when increased chemical and abrasion resistance are required. When used as a primer, Sikafloor 216 can be considered where ≤ 4% moisture content by mass (pbw – part by weight) is measured on concrete substrate with Tramex® CME/CMExpert type concrete moisture meter.

Typical applications would include:

Auto dealerships
Institutions
Grocery, department and retail stores
Pharmaceutical laboratories, production rooms and offices.
Museum and galleries.
Animal shelter and veterinary clinics.
Laboratories, Bathroom/Shower areas

Advantages:

Good chemical and mechanical resistance
100% solids as supplied
Attractive, high gloss, reflective coating
Tough, smooth, non-porous surface is easy to clean
Durable, impermeable and seamless
Easily applied with brush, roller or squeegee
Good Abrasion Resistance
Optional integral cove base and curbs can be installed without seams and joints
Excellent Impact Resistance
Unlimited design capabilities available in various textures, patterns and colors

Sikafloor 220W Conductive

PDS | MSDS

Description:

A two-component water based epoxy coating with high electrostatic conductivity. It is designed for use in combination with Sikafloor 200C ESD, and Sikafloor 700C ESD when desiring resistance readings in the conductive range of 2.5 x 104 – 1.0 x 106 ohms. Sikafloor 220W Conductive is useful on a variety of substrates, including existing non-conductive coatings or resurfacers and epoxy primed concrete. Sikafloor 220W Conductive requires a concrete primer prior to application, such as Sikafloor 107, Sikafloor 160, Sikafloor 161 or Sikafloor 1610.

Where to Use:

Electronics
Data Processing
Military/Aerospace
Photographic, graphic arts
Hazard industries (dust or explosion hazards)

Advantages:

Solvent free.
Provides highly conductive ground plane.
Easy application.
Environmentally safe.
Water based, solvent free and odorless
Low VOC Content
Consistent resistance measurements are obtained when testing in accordance with standard methods.
Very low body voltage generation (BVG) values possible when used in conjunction with Sikafloor 200C ESD or 700C ESD and when wearing heel straps C or SD footwear.

Sikafloor 225N

PDS | MSDS

Description:

A low odor, 100% solids epoxy resin coating system primarily designed for high build coating and decorative quartz/flake applications. It may be applied clear or may be pigmented using Sikafloor Epoxy Color Additives.

Where to Use:

Sikafloor 225N is ideal as a broadcast clear, low odor top coat over decorative quartz or vinyl flake floor broadcast systems, as well as slurry applications. Sikafloor 225N clear and/or pigmented can also also be top coated with an aliphatic urethane when increased chemical and abrasion resistance are required.

Advantages:

UV Resistance properties exceed what other similar epoxy systems offer.
100% solids as supplied.
Attractive, high gloss, reflective coating.
Durable, impermeable and seamless
Good abrasion resistance.
Excellent impact resistance.
Good overall resistance to a wide spectrum of chemicals.

Sikafloor 264

PDS | MSDS

Description:

A pigmented, two part low viscosity, self-priming (see priming section), epoxy coating / binder used for smooth and textured coatings and/or broadcast overlayments.

Where to Use:

Roller coat and self-leveling slurry for concrete and cement screeds with normal up to medium heavy wear (e.g. storage, hallways, corridors and assembly halls, maintenance workshops, garages and loading ramps), or as a seal coat for broadcast systems. When used as a primer, Sikafloor 264 can be considered when ≤ 4% moisture content by mass (pbw – part by weight) is measured on the concrete substrate with a Tramex® CME/CMExpert type concrete moisture meter.

Advantages:

Good chemical and mechanical resistance
Easily applied with brush, roller and squeegee
Glossy aesthetic finish
Slip resistant surface possible
Durable, impermeable and seamless
Solvent-free, neutral odor
Low mixed viscosity

Sikaflex 264 Thixo Lite

PDS

Description:

A two-component, high solids, epoxy based, thixotropic topcoat providing a light orange peel texture finish. May be used as a topcoat on Sikafloor Epoxy Flooring Systems. Designed as a top dressing over Sikafloor EpoRok Flooring Systems and Sikafloor Trowelled Epoxy Mortar Systems to enhance abrasion and chemical resistance.

Where to Use:

Grout coat and topcoat for Sikafloor Trowelled Epoxy Mortar Systems with normal up to medium heavy wear (e.g. storage, hallways, corridors and assembly halls, maintenance workshops, garages and loading ramps). Or as a topcoat for Sikafloor Epoxy Systems creating a light orange peel texture finish.

Advantages:

Thixotropic – light orange peel texture
Grout coat for trowelled Epoxy mortar systems
Top Coat for Epoxy mortar systems
Excellent abrasion resistance
Excellent impact resistance
Good chemical and mechanical resistance
Durable, impermeable and seamless

Sikafloor 700

PDS | MSDS

Description:

A two component, high solids, novolac epoxy with exceptional chemical resistance. Sikafloor 700 can be installed as a stand-alone coating. Its versatility allows Sikafloor 700 to be applied as a topcoat for many of the Sika flooring systems or used as a binder in a slurry/broadcast system Sikafloor 700 can be applied as a topcoat with Sikafloor Epoxy Color Additive to create a variety of colors.

Where to Use:

Designed for use as a medium to heavy coat epoxy resurfacer in areas subjected to chemical spillages. Ideal for use in chemical processing, chemical storage areas, and battery charge stations.

Advantages:

Low Odor
Very good chemical resistance
Wide range of colors with Epoxy Color Add
Easy application

Sikafloor 700 ESD / Sikafloor 700C ESD

PDS | MSDS

Description:

Sikafloor® 700 ESD and Sikafloor® 700C ESD are three-component, high-build, solid color, smooth finish and satin finish novolac epoxy coatings specifically designed to provide electrostatic control properties to a variety of substrates, including nonconductive surfaces and prepared concrete, within chemically exposed areas. Sikafloor® 700 ESD provides resistance readings in the ‘static dissipative’ range (1.0 x 106 to 1.0 x 109 ohms) as per EOS/ESD Standards. Sikafloor® 700C ESD provides resistance readings in the ‘conductive’ range (2.5 x 104 to 1.0 x 106 ohms) as per EOS/ESD Standards. The conductive standard is met when Sikafloor® 700C ESD is installed onto Sikafloor® 220W Conductive intermediate coating. The two grades of Sikafloor® 700 ESD exhibit excellent broad spectrum chemical resistance to concentrated acids, caustics and solvents (consult Sika Technical Sales for specific details), with good abrasion and excellent impact resistant properties.

Where to Use:

Electronic manufacturing, calibration and repair facilities.
Chemical production and storage areas.
Military premises.
Aircraft hangers.
Aerospace industries.
Pharmaceutical plants.
Solvent production and storage areas.
Oil refineries.
Explosion hazard areas (gas, vapour, spray or fine dust).

Advantages:

Consistent resistance measurements are obtained when tested at 10 to 500 volts.
Less than 15 volts Body Voltage Generation (BVG) when using conductive footwear.
Available in static dissipative range (1.0 x 106 to 1.0 x 109 ohms) as per EOS/ESD.
Dissipate a 5000 volt charge to zero in less than 0.1 second (22°C [72°F] @ 12% R. H.).
Maintain ESD performance over the wear life of the Sikafloor® ESD coating.
Available in conductive range (2.5 x 104 to 1.0 x 106 ohms) as per EOS/ESD.
Maintain electrical conductivity throughout the entire thickness of the system.
Not dependant on relative humidity for conductivity properties.
Broad spectrum chemical resistance to concentrated acids, caustics and solvents.
Excellent wear, abrasion and impact resistance properties.
Optional non-skid and non sparking textures are available.
Produce tough, smooth, non-porous surfaces that are easy to clean and allow repeated washing and decontamination.
Low VOC; user and environmentally (air quality) friendly.

Sikafloor 1610

PDS | MSDS

Description:

A two component, high solids, red transparent epoxy primer. This epoxy primer is specially formulated to perform as a moisture tolerant primer.

Where to Use:

Sikafloor 1610 is designed as a primer for Sikafloor epoxy and urethane coatings, as well as broadcast and troweled systems. Sikafloor 1610 should be considered where ≤ 6% mass (pbw – part by weight) is measured on concrete substrate with Tramex® CME CMExpert type concrete moisture meter.

Advantages:

Excellent penetration and adhesion
Moisture tolerant
Low Tensile Modulus
Higher Tensile Elongation
Low VOC’s

Sikafloor FTP (Fast Track Primer)

PDS | MSDS

Description:

Three-component, 36% solids, waterborne-epoxy. As a moisture vapor treatment, Sikafloor FTP will reduce water vapor levels from as high as 8 lbs. per 1.000 sq.ft. to below the acceptable level of 3 lbs. per 1.000 sq.ft in a single coat. This application requires a shotblasted surface.

Where to Use:

Use as a moisture vapor treatment under Sikafloor epoxy and urethane coatings as well as broadcast and troweled systems.

Advanategs:

Low VOC
Fast dry time
Low odor
Moisture tolerant

Sikagard 215

PDS | MSDS

Description:

Sikagard 215 RF System: Fiber Reinforcement Filled Coating includes temperature resistant reinforcement fibers enabling quick, easy application using a roller. Sikagard 215 RF System consists of two coats of Sikagard 215 Resin and Sikafloor 215 Hardener. Should be topcoated with a variety of available Sika topcoats. Typical Sikagard 215 RF application thickness: 20 mils DFT.

Where to Use:

Pharmaceutical & cosmetic manufacturing facilities
Food & beverage processing facilities
Health care facilities
Operating rooms, scrub rooms, intensive care & therapy rooms
“Clean room environments” for pharmaceutical, animal research & electronic facilities
Class 10 to Class 1,000 performance areas
Commercial kitchens, dishwasher & waste disposal areas
Environments where high impact walls are required

Advantages:

Seamless surface
Easily cleaned via wash downs
Maximum impact & chemical resistance
No static cling
May be applied to a variety of substrates
Good abrasion resistance
Unaffected by most temperature variations

Urethane

Sika Decoflake UEF

PDS

Description:

Comprised of a self-leveling, medium to heavy duty, solid colored, three component, cementitious urethane slurry, Sikafloor PurCem 22N, topped with Sikafloor 203 pigmented basecoat broadcast to refusal with vinyl flakes, sealed with two topcoats of Sikafloor 203, finished with Sikafloor 315, a high solids, abrasion resistant, aliphatic polyurethane coating. Decoflake UEF has an aesthetic, easy to clean, smooth surface. Systems are typically installed at 3⁄16 to 1⁄4 in. (4.5-6 mm) thickness.

Where to Use:

Typically used in pharmaceutical, biotech and research applications. Areas include: wet and dry process, laboratories, clean rooms, animal care and research, fine chemical scale-up and production. Also applied in dairies, breweries, wineries, distilleries, laboratories, chemical process plants, pulp and paper plants, warehouses and storage areas.

Advantages:

Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Refer to the Sikafloor Chemical Resistance Charts. Consult Sika Technical Service for additional information.
Can be applied over partially cured concrete slabs (<10% moisture), full 28 day cure time is not necessary. Can be applied over concrete slabs with up to 15 pounds of water vapor transmission per 1,000 ft2 per 24. hours when tested in accordance with ASTM F 1869.
Minimal maintenance costs, superior life cycle cost advantage versus tile.
Fast turnaround applications may utilize Sikafloor 510 Polyaspartic for basecoats and topcoats.

Sikafloor -19NA PurCem

PDS | MSDS

Description:

Trowel grade, heavy duty, solid color, three-component, water dispersed polyurethane-based / cement and aggregate screed designed to provide excellent resistance to abrasion, impact, chemical attack and other physical aggression. Sikafloor-19NA PurCem has a textured aggregate surface providing moderate slip resistance. Sikafloor-19NA PurCem Broadcast has a broadcast aggregate texture for increased slip resistance. Both systems are typically installed at 1/4 to 3/8 in (6 to 9 mm) thickness.

Where to Use:

Sikafloor-19NA PurCem is primarily used to protect concrete substrates.
Typically used in food processing plants, wet and dry process areas, freezers and coolers, thermal shock areas, dairies, breweries, wineries, distilleries, laboratories, chemical process plants, pulp and paper plants, warehouses and storage areas.

Advantages:

Can be applied onto green concrete (typically 7 -10 days) after adequate preparation and where substrate has tensile bond strength in excess of 218 psi (1.5 MPa).
Can be applied to concrete substrates where < 100% relative humidity is measured as per ASTM F2170.
Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Consult Sika Technical Sales for full details. Refer to the Sikafloor PurCem Chemical Resistance Chart.
Similar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling. It will perform and retain its physical characteristics through a wide temperature range from -40°F (-40°C) up to 248°F (120°C).
Steam cleanable at 1/4 – 3/8 in (6 – 9 mm) thickness.
Bond strength in excess of the tensile strength of concrete, concrete will fail first.
Non-taint, odorless.
Behaves plastically under impact / deforms but will not crack or debond.
High abrasion qualities result from its aggregate structure.
Can be applied over partially cured concrete substrates (<10% surface moisture), full 28 days cure time is not necessary.
Extra Expansion joints are not necessary; maintain and extend existing expansion joints up through the Sikafloor PurCem Flooring System.
Minimal maintenance costs, superior life cycle cost advantage versus tile.
Achieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth.
Meets the requirements of USDA for use in food plants.

Sikafloor -20NA PurCem

PDS | MSDS

Description:

Resin rich, easy to trowel, heavy duty, solid color, three-component, water dispersed polyurethane-based / cement and aggregate screed. It is designed to provide excellent resistance to abrasion, impact, chemical attack and other physical aggression. Sikafloor-20NA PurCem has a textured aggregate surface providing moderate slip resistance. Selected aggregate can be broadcast on the wet screed to increase the surface texture. Typically installed at 1/4 to 3/8 in (6 to 9 mm) thickness.

Where to Use:

Sikafloor-20NA PurCem is primarily used to protect concrete substrates.
Typically used in food processing plants, wet & dry process areas, freezers & coolers, thermal shock areas, dairies, breweries, wineries, distilleries, laboratories, chemical process plants, pulp and paper plants, warehouses and storage areas.

Advantages:

Can be applied onto green concrete (typically 7 -10 days) after adequate preparation and where substrate has tensile bond strength in excess of 218 psi (1.5 MPa).
Can be applied to concrete substrates where < 100% relative humidity is measured as per ASTM F2170.
Easy installation requiring less labor to install than traditional Sikafloor PurCem trowel grade materials.
Resists a wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Consult Sika Technical Sales for full details. Refer to the Sika PurCem Chemical Resistance Chart.
Similar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling. It will perform and retain its physical characteristics through a wide temperature range from -40°F (-40°C) up to 248°F (120°C).
Steam cleanable at 1/4 – 3/8 in (6 – 9 mm) thickness.
Bond strength in excess of the tensile strength of concrete, concrete will fail first.
Non-taint, odorless.
Can be applied over partially cured concrete substrates (<10% surface moisture), full 28 days cure time is not necessary.
Behaves plastically under impact; deforms but will not crack or debond.
Extra Expansion joints are not necessary; simply maintain and extend existing expansion joints up through the Sikafloor PurCem Flooring System.
Minimal maintenance costs, superior life cycle cost advantage versus tile.
Achieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth.
Meets the requirements of USDA for use in food plants.

Sikafloor -22NA PurCem

PDS | MSDS

Description:

A self-leveling, medium to heavy duty, solid colored, three component, cementitious urethane slurry designed to provide excellent resistance to abrasion, impact, and chemical attack. Sikafloor-22NA PurCem is broadcast with dried silica sand and sealed with Sikafloor-31NA PurCem to produce a solid color finish, or can be broadcasted with colored quartz aggregate and sealed with Sikafloor 510 clear polyaspartic topcoat for a decorative finish The system is typically installed at 3/16 to 1/4 in (4.5 to 6 mm) thickness.

Where to Use:

Sikafloor-22NA PurCem is primarily used to protect concrete substrates.
Typically used in food processing plants, wet & dry process areas, freezers & coolers, dairies, breweries, wineries, distilleries, laboratories, chemical process plants, pulp and paper plants, warehouses and storage areas and pharmaceutical facilities .

Advantages:

Can be applied onto green concrete (typically 7 -10 days) after adequate preparation and where substrate has tensile bond strength in excess of 218 psi (1.5 MPa).
Can be applied to concrete substrates where < 100% relative humidity is measured as per ASTM F2170.
Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Consult Sika Technical Sales for full details. Refer to the Sikafloor PurCem Chemical Resistance Chart.
Similar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling. It will perform and retain its physical characteristics through a wide temperature range from -40°F (-40°C) up to 248°F (120°C).
Bond strength in excess of the tensile strength of concrete, concrete will fail first.
The broadcast finish provides a slip resistant surface.
High abrasion qualities result from its aggregate structure.
Can be applied over partially cured concrete substrates (<10% surface moisture), full 28 days cure time is not necessary.
Minimal maintenance costs, superior life cycle cost advantage versus tile.
Behaves plastically under impact / deforms but will not crack or debond.
Achieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth.
Meets the requirements of USDA for use in food plants.
Non-taint, odorless.

Sikafloor -29NA PurCem

PDS | MSDS

Description:

Vertical grade, three-component, solid color, water dispersed polyurethane-based/cement and aggregate mortar used for detailing work and coving. It has a finely textured smooth aggregate appearance that provides excellent resistance to abrasion, impact, chemical attack and other physical aggression. System is typically installed at 1⁄8 to 1⁄4 in (3 – 6 mm) thickness.

Where to Use:

Sikafloor-29NA PurCem is primarily used to protect concrete substrates. .
Typically used in food processing plants, wet and dry process areas, freezers and coolers, dairies, breweries, wineries, distilleries, laboratories, chemical process plants, pulp and paper plants, warehouses and storage areas.

Advantages:

Can be applied onto Green Concrete (typically 7 -10 days) after adequate preparation and where substrate has tensile bond strength in excess of 218 psi (1.5 MPa) and Sikafloor primer can be applied
Can be applied to concrete substrates where < 100% relative humidity is measured as per ASTM F2170.
Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Consult Sika Technical Sales for full details. Refer to the Sika PurCem Chemical Resistance Chart
Designed specifically for trowel applications to vertical surfaces.
Similar coefficient of thermal expansion to concrete allowing movement with the substrate through normal thermal cycling. It will perform and retain its physical characteristics through a wide temperature range from -40°F (-40°C) up to 248°F (120°C).
Bond strength in excess of the tensile strength of concrete, concrete will fail first.
Non-taint, odorless.
Can be applied over partially cured concrete substrates (<10% surface moisture), full 28 days cure time is not necessary.
Behaves plastically under impact; deforms but will not crack or debond.
High abrasion qualities result from its aggregate structure.
Easily maintained.
Minimal maintenance costs, superior life cycle cost advantage versus tile.
Achieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth.
Meets all USDA Food Code requirements for flooring materials.

Sikafloor -31NA PurCem

PDS | MSDS

Description:

Three-component, solvent-free, high-build, colored, matt finish. Coating based on the unique Sikafloor PurCem water dispersed polyurethane/cement and aggregate technology. Typically installed as stand alone coating for concrete susbtrates or used as a top coat for Sikafloor PurCem broadcast textured finishes. It provides an economical solution that has excellent chemical resistance properties and very good durability against abrasion and mechanical damage. Installed thickness 15-20 mils per coat.

Where to Use:

As a high build coating.
As a chemical resistant concrete coating.
Typically used in food processing plants, chemical storage areas, warehouses, washrooms, laboratories, food preparation areas and chemical process plants.

Advantages:

Can be applied onto Green Concrete (typically 7 -10 days) after adequate preparation and where substrate has tensile bond strength in excess of 218 psi (1.5 MPa).
Can be applied to concrete substrates where < 100% relative humidity is measured as per ASTM F2170.
Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Consult Sika Technical Sales for full details. Refer to the Sika PurCem Chemical Resistance Chart.
Non-taint, odorless.
Good wear resistance from a two coat application, if used as a stan-alone coating.
Economical and easy to apply.
Can be applied over partially cured concrete substrates (<10% surface moisture), full 28 days cure time is not necessary.
Minimal maintenance costs, superior life cycle cost advantage versus tile.
Achieves highest performance ratings according to ASTM G21 resistance to fungi and ASTM D3273 resistance to mold growth.
Meets the requirements of USDA for use in food plants.

Sikafloor 315

PDS | MSDS

Description:

High solids, low VOC abrasion resistant, aliphatic polyurethane coating. It can be applied as a three part clear, or four part pigmented coating. Wear additive is included for increased abrasion resistance.

Where to use:

Sikafloor 315 provides excellent adhesion and wear resistant properties to epoxy primed concrete substrates. It displays excellent UV resistance and chemical resistance. Sikafloor 315 includes wear aggregate which includes abrasion resistance and is typically used in light to heavy traffic areas.

Advantages:

Superior abrasion resistance
High impact resistance
Excellent UV resistance

Sikafloor 340

PDS | MSDS

Description:

An aliphatic urethane with excellent chemical resistance and UV resistance

Where to Use:

Sikafloor 340 is typically used in areas such as aircraft hangars, light to medium traffic areas, where light reflectance and chemical resistance to spills are required. It can be used as two part clear and three part pigmented coating.

Advantages:

VOC compliant in 340 g/L regulated districts
Excellent UV resistance
Light reflectance
Good stain resistance
High abrasion resistance
Excellent chemical resistance
Wide range of colors using Sikafloor Urethane Color Additive
Clear or Pigmented

Sikafloor 340 ESD

PDS | MSDS

Description:

A five component, aliphatic polyurethane ESD control system. The system is applied in two coats to provide a tough, durable ESD surface with matte finish.

Where to Use:

Designed to impart electrostatic control properties to a variety of substrates, including existing non-conductive coatings or resurfacers, vinyl tile, static control tile and concrete. Sikafloor 340 ESD keeps these surfaces smooth, bright, and far more chemically resistant. Its aliphatic nature will keep the coating from yellowing when exposed to ultraviolet light (UV). Sikafloor 340 ESD can be used in almost any environment where the damaging effects of electrostatic discharge (ESD) cannot be tolerated. Industries currently using Sikafloor 340 ESD:

Electronics
Data processing
Military/Aerospace
Photographic, graphic arts
Hazard industries (dust or explosion hazards)

Advantages:

Consistent resistance measurements are obtained when testing in accordance with standard methods.
Very low body voltage generation values possible when wearing heel straps C or SD footwear.
Conforms to ANSI S20.20, < 3.5 x 107 ohms when tested in accordance with ANSI STM 97.1
Maintains ESD performance over the wear life of the coating.
Maintains electrical conductivity throughout the entire thickness of the system.
Does not depend on relative humidity for conductivity properties.
Excellent hard wearing surface.
Tough, non-porous surface is easy to clean and maintain.
Good abrasion resistance

Sikafloor 422

PDS | MSDS

Description:

A water-based, high solids, two-component urethane with excellent abrasion and adhesion properties.

Where to Use:

For use as a topcoat over epoxy floor or wall base coats. Water based formulation allows for use in areas where conventional solvent based systems cannot be used.

Advantages:

Water based — low odor
Good UV stability
Excellent abrasion resistance
Good chemical resistance
High light reflectance
High gloss, stippled finish

Sikafloor 510

PDS | MSDS

Description:

A clear two-component, solvent-free, high solids, low-viscosity, high strength, polyaspartic resin system. Sikafloor 510 is designed to be installed as a clear topcoat over a quartz or flake broadcast system where a low VOC, quick cure, flexible, UV resistance finish coat is necessary. Sikafloor 510 is available in clear or with Sikafloor Urethane Color Additive to achieve a variety of colors.

Where to Use:

Typically used in decorative applications, chemical storage areas, warehouses, washrooms, laboratories, food preparation areas and chemical process plants.

Advantages:

Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Refer to Chemical Resistance Chart.
Cures quickly, fast turnaround
Durable, impermeable and seamless
Superior mechanical resistance.
Excellent chemical resistance
Superior aesthetic finish.
Excellent UV resistance
Low maintenance.
Does not support growth of bacteria or fungus.
High density prevents dirt penetration, which provides easy cleaning.
Solvent-free.
Meets USDA requirements for incidental food contact

Sikafloor 510 LPL

PDS | MSDS

Description:

Clear two-component, high solids, low-viscosity, high strength, fast cure, UV resistant, polyaspartic urethane coating system. Sikafloor 510 LPL has an extended working time and usable Pot-Life when compared to Sikafloor 510 especially in hot and humid conditions.

Where to Use:

It can be used as a concrete primer, binder, and sealer when fast cure times and UV resistance are required.

Advantages:

Resists a very wide range of organic and inorganic acids, alkalis, amines, salts and solvents.
Cures quickly, fast turnaround
Extended working time
Durable, impermeable and seamless
Superior mechanical resistance.
Excellent UV resistance
Excellent chemical resistance
Superior aesthetic finish.
Low maintenance.

Sikaguard 307 W

PDS | MSDS

Description:

A single component waterborne polyurethane based coating, designed with specific hygiene functionality. The in film preservation is designed to remain permanently locked in and active ensuring no growth of surface micro-organisms on the Sikagard 307 W. Sikagard 307 W is available in white and 30 other standard colors.

Where to Use:

Internal walls and ceilings of environments that require continuously sanitary conditions.
Pharmaceutical
Food & Beverage
Bio-tech manufacturing
Hospitals
Clean rooms
Laboratories

Advantages:

Single component waterbased, low odor
Hard finish and impact; scratch and abrasion resistant
Gloss, easy clean finish
Non-yellowing
Fast development of physical strength
Rapid drying, same day re-coat if necessary
One coat finish (airless spray)
Leach resistant in film preservative

MMA

Sikafloor Pronto 13

PDS | MSDS

Description:

Sikafloor Pronto 13 is a two component, reactive acrylic primer, based on Methyl Methacrylate (MMA) chemistry. It’s low viscosity and excellent strength allow it to penetrate and reinforce concrete substrates. Applying this fast-curing primer to properly prepared concrete is the first step to the installation of all Sikafloor Pronto MMA based flooring systems.

Where to Use:

Automotive Dealerships
Food & Beverage Processing
Manufacturing
Animal Clinics
Pharmaceutical Facilities
Supermarkets
Coolers and Freezers
Retail Sales Spaces
Sports Facilities, Concourses, Locker rooms, Concessions

Adavantages:

Low viscosity, penetrating
Fast cure time – under 1 hour
100% Reactive
UV Resistant
Repairs seamlessly

Sikafloor Pronto 14

PDS | MSDS

Description:

Sikafloor Pronto 14 is a (3) three- part, fast curing, self-smoothing screed coating based on reactive acrylic resins. Sikafloor Pronto 14 can be used as a binder for leveling mortars and also serves as a receiver coat for decorative quartz or flake broadcast systems. Sikafloor Pronto 14 can be used as the binder for a vertical cove mix in combination with 30 mesh dried silica sand or decorative quartz and the addition of Sylothix 51 thixotrope.

Where to Use:

Automotive Dealerships
Food & Beverage Processing
Manufacturing
Animal Clinics
Pharmaceutical Facilities
Supermarkets
Coolers and Freezers
Retail Sales Spaces
Sports Facilities, Concourses, Locker rooms, Concessions

Advanatages:

Very fast curing, even at low temperatures
Good mechanical and chemical resistance
100% Reactive
UV Resistant
Repairs seamlessly

Sikafloor Pronto 15

PDS | MSDS

Description:

Sikafloor Pronto 15 is a (3) three- part, fast curing, self-smoothing screed coating based on reactive acrylic resins. Sikafloor Pronto 15 is formulated with increased flexibility for increased resistance to thermal shock and impact. Sika Pronto 15 can be used as a binder for levelling mortars and also serves as a receiver coat for decorative quartz broadcast systems. Sikafloor Pronto 15 can also be used without filler as a flexible membrane.

Where to Use:

Formulated for increased resistance to thermal shock and impact resistance.
Automotive Dealerships
Food & Beverage Processing
Manufacturing
Animal Clinics
Pharmaceutical Facilities
Supermarkets
Coolers and Freezers
Retail Sales Spaces
Sports Facilities, Concourses, Locker rooms, Concessions

Advantages:

Flexible, tough-elastic
Very fast curing, even at low temperatures
Good mechanical and chemical resistance
100% Reactive
UV Resistent
Repairs seamlessly

Sikafloor Pronto 16

PDS | MSDS

Description:

Sikafloor Pronto 16 is a two component, reactive acrylic coating based on methyl methacrylate (MMA). Sikafloor Pronto 16 is designed to be used as the topcoat of Sikafloor Pronto MMA based flooring systems. Sikafloor Pronto 16 provides protection from mechanical, thermal, chemical, and UV exposure. Sikafloor Pronto 16 can be applied as a clear or pigmented topcoat.

Where to Use:

Automotive Dealerships
Food & Beverage Processing
Manufacturing
Animal Clinics
Pharmaceutical Facilities
Supermarkets
Coolers and Freezers
Retail Sales Spaces
Sports Facilities, Concourses, Locker rooms, Concessions

Advantages:

100% Reactive
UV Resistant
Abrasion and scratch resistant
Low viscosity
Superb chemical, mechanical, and thermal resistance
Fast cure time – under 1 hour
Repairs seamlessly

Sikafloor Pronto 17

PDS | MSDS

Description:

Sikafloor Pronto 17 is a flexible, two component, reactive acrylic coating based on methyl methacrylate (MMA). Sikafloor Pronto 17 is designed to be used as the topcoat of Sikafloor Pronto MMA based flooring system especially in wet and cold storage areas. Sikafloor Pronto 17 provides protection from mechanical, thermal, chemical, and UV exposure. Sikafloor Pronto 17 can be applied as a clear or pigmented topcoat.

Where to Use:

Automotive Dealerships
Food & Beverage Processing
Manufacturing
Animal Clinics
Pharmaceutical Facilities
Supermarkets
Coolers and Freezers
Retail Sales Spaces
Sports Facilities, Concourses, Locker rooms, Concessions

Advantages:

100% Reactive, VOC Compliant
UV Resistant
Abrasion and scratch resistant
Low viscosity
Superb chemical, mechanical, and thermal resistance
Fast cure time – under 1 hour
Repairs seamlessly

Silicone

Sikasil WS-290

PDS | MSDS

Description:

Sikasil WS-290 is a one-part, neutral-curing, ultra low-modulus, low to no bleed silicone sealant that cures to a durable, flexible building sealant Sikasil WS-290 performs exceptionally well under dynamic conditions due to its ultra-low modulus, high extension/compression, recovery properties and strong adhesion to most building materials. Sikasil WS-290 accommodates long-term movement of +100-50% in properly designed joints and is particularly well suited for use in Exterior Insulation Finish Systems (EIFS). Meets the requirements of ASTM C-920, Type S, Grade NS, Class 100/50, Use NT, M, G, A, O; TT-S-00230C, Type II, Class A; TT-S-001543A, Class A; CAN/CGSB-1 9.1 3-M87, AAMA 808.3

Where to Use:

Sealing expansion and control joints in precast concrete panels and metal curtain walls.
As a weatherseal in glass to glass butt joint glazing
As a weatherseal in both conventional glazing and structural glazing* applications, including cap, toe and heel beads
Exterior Insulation Finish Systems (EIFS) and numerous other areas requiring a high-performance sealant.

Sikasil WS-290 FPS

PDS | MSDS

Description:

Sikasil WS-290 FPS is a field pigmentable, low to no bleed low modulus, one–component plus color pack, non-sag elastomeric, neutral cure silicone sealant a durable, flexible building sealant Sikasil WS-290 FPS performs exceptionally well under dynamic conditions due to its ultra-low modulus, high extension/compression, recovery properties and strong adhesion to most building materials.Sikasil WS-290 FPS accommodates long-term movement of +100-50% in properly designed joints and is particularly well suited for use in Exterior Insulation Finish Systems (EIFS). Meets the requirements of ASTM C-920, Type S, Grade NS, Class 100/50, Use NT, M, G, A, O; TT-S-00230C, Type II, Class A; TT-S-001543A, Class A; CAN/CGSB-19- .13-M87, AAMA 808.3.

Where to Use:

Sikasil WS-290 FPS silicone sealant is designed primarily for sealing expansion and control joints in precast concrete panels, architectural stones, metal curtainwalls, perimeter sealing of doors and windows, Exterior Insulation Finish Systems (EIFS) and numerous other areas requiring a high-performance sealant. It adheres tenaciously to concrete, natural stones, masonry, steel, fluoropolymer painted and powder coated aluminum, wood, vinyl and many other plastics, generally without need for a primer, and performs equally well in new or remedial construction.

Sikasil WS-295

PDS | MSDS

Description:

Sikasil-WS 295 sealant is a one part, neutral cure, low to no bleed silicone sealant for use in most common weatherproofing applications on a wide variety of materials. Meets the requirements of ASTM C-920, Type S, Grade NS, Class 50, Use NT, M, G, A, O; TT-S-00230C, Type II, Class A; CAN/CGSB-19.13-M87, AAMA 802.3 Type II, AAMA 803.3, AAMA 805.2, AAMA 808.3

Where to Use:

Sikasil WS-295 silicone sealant has been specifically designed for:

As a weatherseal in both conventional glazing and structural glazing* applications, including cap, toe and heel beads
As a weatherseal in glass to glass butt joint glazing
Sealing expansion and control joints in precast concrete panels and metal curtain walls.
Perimeter sealing of doors, windows and other building components
Adhering stiffeners to building panels
Excellent for use in unitized curtain wall systems

Sikasil WS-295 FPS

PDS | MSDS

Description:

Sikasil-WS 295 FPS sealant is a, field pigmentable sealant is a low to no bleed versatile weather sealant/ adhesive, one component plus color pack, non-sag elastomeric, neutral cure silicone sealant. Meet the requirement of ASTM C-920,Type S, Grade NS, Class 50, Use NT, M, G, O; TT-S-00230C, Type II Class A; CAN/CGSB-19.13-M87, AAMA 802.3

Where to Use:

Sikasil WS-295 FPS silicone sealant has been specifically designed for:

As a weatherseal in nonstructural glazing applications, including cap, toe and heel beads
As a weatherseal in glass to glass butt joint glazing
Sealing expansion and control joints in precast concrete panels and metal curtain walls
Perimeter sealing of doors, windows and other building components
Adhering stiffeners to building panels
Excellent for use in unitized curtain wall systems

Sikasil -GP

PDS | MSDS

Description:

Sikasil®-GP products are general purpose, one-component, non-sag, elastomeric, RTV acetoxy silicone sealants with good adhesion characteristics for general sealing and bonding applications. Meets the requirements of Type S, Grade NS, Class 25, Use NT, G, A, O. Recognized under UL QMFZ2, ANSI/NSF Standard 51 for direct food contact and California Air Resources Board 2003 requirements for Volatile Organic Compound content. Sikasil®-GP maintains elastomeric properties up to 275° F continuous, 325°F intermittent, and Sikasil®-GP HT (High Temperature) red up to 500°F continuous, 550°F intermittent. Sikasil®- GP HT Red also meets federal specification TT-S-005143A, Class A, MIL-A-46106. Meets the requirements of C-920, Type S, Grade NS, Class 25, Use NT, G, A, O.

Where to Use:

Sealing & glazing of windows, doors and skylights
Conventional glazing and Storefronts
Kitchen and bath countertops, Sanitary seals
HVAC, Plumbing, Roofing
Sealing trucks, trailers and RVs
Marine applications
Appliance Assembly

Advantages:

One-component ready to use
Excellent for dynamic joint movement & dissimilar materials, Joint movement ±25%
Excellent adhesion, bonds to many substrates without priming
Fast Cure – Move assembled or sealed parts quickly
Wide service temperature / durability
Superior gunning & tooling
High temperature red for temperature resistance up to 550°F
Contains Anti-microbial additive for mold resistance.

Sikasil -N PLUS US

PDS | MSDS

Description:

Sikasil®-N Plus US is a general purpose, one-component, non-sag, elastomeric, 100% RTV neutral cure silicone sealant. Meets the requirements of ASTM C-920, Type S, Grade NS, Class 25, Use NT, T, M, G, A, O; TT-S-00230C, Type II, Class A; TT-S-001543A, Class A; CAN/CGSB- 19.13-M87, AAMA 802.3 Type II, AAMA 803.3, AAMA 805.2, AAMA 808.3 and California Air Resources Board 2003 requirements for Volatile Organic Compound content.

Where to Use:

Window and door fabrication
Conventional glazing
Back bedding and cap, toe and heel beads
Perimeter sealing of windows, doors and skylights
Expansion and control joints
HVAC, White goods assembly
Kitchen and bath countertops/solid surfaces, Sanitary Seals
Marine cabins
Truck/trailer/auto/RV

Advantages:

Extremely long service life
Excellent flexibility for dynamic joint movement
Bonds to most substrates without priming
Ready to use, no mixing required
AAMA Certified component for window backbedding / glazing
All season ease of application
Fungicide additive for mildew resistance

Sika silbridge-300

PDS

Description:

Sika Silbridge-300 products are extruded ultra low modulus elastomeric silicone profile that are usually bonded to substrates using Sikasil WS-295 sealant as an adhesive. Sika Silbridge-300 comes in a variety of standard shapes, colors and sizes and is successfully used in various applications.

Where to Use:

Sika Silbridge-300 extruded profiles are specifically designed for numerous applications including but not limited to:

Expansion joint seals (new & remedial construction)
Window perimeter joint seals
Roofing seals
Fillet beads, coping joints and window seals (custom design)
EIFS systems renovation
Metail curtain wall

Advantages:

High tear resistance
Ease of installation
Color fast formulation
Wide operational temperature range
Non corrosive and corrosion resistant
Resistant to ultraviolet exposure and weathering
Capable of sealing high movement joints
Reduces stress at bond-line making it well suited for soft and sensitive substrates such as EIFS
Rapid cure of thin adhesive layer allows for early movement of substrates
Economical alternative to cutting out existing failed sealant