Vacuums
BULL 1250 Vacuum
Product Information
- Over 62 sq/ft of filter area
- Quiet – only 75 dB
- Secondary HEPA filtration
- Manual filter shaker system which is extremely durable, dependable and easy to use
- 8.5 HP regenerative motor
- Soft start
- Oversize dust bin – uses heavy mil plastic bags for easy emptying (sold seperately)
- Includes 50’ of 3” hose and 100’ of heavy duty power cord
- Constructed of 14 gauge steel for longevity in industrial use
View Manual
BULL 250 Vacuum
Product Information
- Self-cleaning Teflon-coated tube-filter
- Continuous filter-cleaning during operation
- Monitoring suction-power during operation
- HEPA-filter
- Steel frame with large wheels
- Splash proof
- Emptying from the bottom
- Diversion for statically electricity
- Average emission during recognized test with quartz-dust 0,06 mg/m3
- Holds back 99,999% of all particles larger than 0,3 µm (0,0003 mm)
View Manual
BULL 300 Vacuum
Product Information
- The industry’s most powerful 110 volt vacuum
- Continuous duty operation
- Secondary backup filtration system (HEPA)/
- 320 CFM, utilizing 37 sq/ft of filter area
- Primary filters exceed industry standards
- Filters can be cleaned by simply pulling the filter cleaning lever while in operation
- 20 gallon equalized pressure container uses standard trash liners for dust
- Includes 25′ of 3″ hose
(Wand & floor nozzle sold separately)
View Manual
BULL 45 Vacuum
Product Information
Finally a small compact vacuum designed to perform under the rigorous conditions imposed when grinding concrete. Ideal to use with hand tools when grinding concrete, preparing concrete surfaces and removing coatings.
- 45 HEPA Filtration
- 10 gallon dry vac only
- Includes:
2 piece metal wand with crush proof hose
2 brushes – 14″ floor & 3″ round dusting
17″ crevice tool
48′ cord
View Manual
Floor Scrapers
Cyclone Floor Scraper
Product Information
- Most efficient battery powered floor scraper
- Triple blade action to manuever, angle and pivot the scraper blade
- Fits through standard doorways and on elevators
- Removes VCT, ceramic tile, and more
- Comes standard with both a
- 110V and 220V charger
- Single joystick control for speed, steering, and direction
View Manual
Hurricane Floor Scraper
Product Information
- Compact and versatile
- Triple blade action to manuever, angle and pivot the scraper blade
- Compact design maneuvers through hallways with ease
- Removes VCT, hardwood flooring, ceramic tile and more
- Powerful 25 HP engine
- Single joystick control for speed, steering, and direction
View Manual
Lightning Floor Scraper
Product Information
- Most powerful scraper in small machine class
- Triple blade action to manuever, angle and pivot the scraper blade
- Compact design for tight spaces
- Removes VCT, carpet, vinyl and rubberized floors with ease
- Hydrostatic drive system
- Single joystick control for speed, steering, and direction
View Manual
Twister Floor Scraper
Product Information
- Ideal for heavy-duty flooring removal
- Triple blade action to manuever, angle and pivot the scraper blade
- Compact design maneuvers through hallways with ease
- Removes VCT, hardwood flooring, ceramic tile, and more
- Powerful 42 HP engine (Optional 55 HP GM Engine)
- Single joystick control for speed, steering, and direction
View Manual
Needle Scalers
SC28 and SC28 Shroud
- Lightweight but powerful to quickly clean and resurface metal and concrete
SC28AVS and SC28AVS Shroud
- Anti vibration system helps to prevent user fatigue
SC49 and SC49 w/ Shroud
- Heavy-duty scaler works quickly for the toughest jobs
Grinders
EDGEPRO180 Floor Grinder
Product Information
- Variable speed control
- Heavy-duty steel frame construction
- Directional motor control keeps head against the wall
- Pivoting rear wheels allows grinding parallel to the wall
- Weights are positioned directly over grinding head for maximum down pressure
PDG6000 Planetary Grinder
Product Information
- Versatile – ideal foropen or confined spaces
- Perfectly balanced
- Built for low maintenance
- Sleek, ergonomic design
- Advanced LCD display
- Standard feature – headsadjust from rigid to flex
- Includes QCS plates
- Includes two 35 lb removableweights and will accept up to four 35 lb weights(additional weights sold seperately)
- Connects to SASE BULL 300dust extractor for dust-freeoperation
View Manual
PDG8000 Planetary Grinder
Product Information
- Powerful 20 HP motor
- Perfectly balanced
- Built for low maintenance
- Sleek, ergonomic design
- Advanced LCD display
- Standard feature – heads adjust from rigid to flex
- Includes both QCS and flex plates
- Includes two 50 lb removableweights and will accept up to four 50 lb weights(additional weights sold separately)
- Connects to SASE BULL 1250dust extractor for dust-freeoperation
View Manual
Scarifiers
SC8E Scarifier
Product Information
- Uncompromised performance in a small size
- Compact for easy handling and transportation
- Side access drum assembly for quick and easy cutter changes
- Heavy-duty hex shaft
- Sealed bearings and no exposed moving parts
- Equipped with an emergency stop safety cord
- Connects to SASE BULL 50 vac for dust-free operation
View Manual
SC10E Scarifier
Product Information
Engineered for performance and durability using sealed bearings, tooth pulley & Drive Belt System.
- 2″ Toothed Belt
- Sealed Bearings
- Heavy-duty hex shaft
- Side access drum assembly for quick and easy cutter changes
- No exposed moving parts
- Emergency Pull Cord
View Manual
SC12E Scarifier
Product Information
- The industry’s most durable and productive scarifier
- Side access drum assemblyfor quick and easy cutterchanges
- Heavy-duty hex shaft
- Sealed bearings and no exposed moving parts
- Equipped with an emergency stop safety cord
- Connects to SASE BULL 250 vac for dust-free operation
View Manual
Hand Held Tools
Corner Polishing Tool
Product Information
- Ideal for finishing corners, around doorways, and stairways on your polished concrete job
- Variable-speed triangular sanding pad
- Oscillates between 12,000 rpm and 21,000 rpm
- Smooth, quiet operation
This tool is perfect for reaching the impossible corners.
SC50 Hand Held Grinder
Product Information
- Compact – ideal for edge work
- High torque for maximum production without motor burn outVariable speed 700-2200 RPM rated load
- Durable enough to remove mastics and coatings
- Shroud and dust port for dust free operation
SC70 Hand Held Grinder
Product Information
- Hand held dustless grinding at its finest
- Compact – ideal for edge work
- Remove mastics and coatings
- Prepare concrete surfaces
- Has a durable shroud and hose support that prevents the hose from pulling on the shroud, maximizing dust control
- Vacuum port
- Loop handle
- Connects to SASE BULL 50 dust extractor for dust-free operation
View Manual
Diamond Tooling
Galaxy System
Product Information
The 27” Galaxy foam carrier pad is designed to be mounted to the drive plate on a 27” burnisher. This allows you, the contractor the versatility to use a variety of different diamond pad grit sizes ranging from 50 to 3,000. This pad allows you to bring back the luster of a previously polished concrete floor from many different levels of reflectivity.
Gold Post Style Metal Bonds
Product Information
- For use on hard to very hard concrete
- Aggressive without gouging the floor
- Easily mounts to the SASE flex plate for grinding in low areas of the floor while exposing minimal aggregate
- Available in 40, 80, and 150 grits
Yellow Post Style Metal Bonds
Product Information
- For use on extremely hard concrete
- Aggressive without gouging the floor
- Easily mounts to the SASE flex plate for grinding in low areas of the floor while exposing minimal aggregate
Quik Cuts
Product Information
- Ideal transition diamond for moving from metals to resins
- Use as the initial cut to eliminate metal bond stepson new concrete
- Eliminate 40 and 80 grit metal bond scratches
- Cut quicker, cut smarter
Razor Scraper
Product Information
- Ideal for removal of VCT, lineolium, carpet, expansion joint fill cleanup and more
- Designed for heavy-duty, professional use
- Solid steel construction
- Beveled edges and counter sunk screws
- Accepts standard blades
- Oversized, ergonomic handle grips for maximum pushing action
Misc.
Burnisher 27”
Product Information
- On-board dust control
- Hose easily connects to
- SASE Bull 50 or any shop vac
- Low emissions EPA & CARB
- 3-way catalytic muffler
- lowers CO, HC and NOx emissions
- Emissions monitor shuts down engine if CO levels rise
- Drop-in bottle carrier for easy cylinder replacement
- Metal pad holder for heat deflection and flatter pad
View Manual
Gloss Meter
Product Information
- A must have for most new construction and retail work – gloss measurements are required in many specifications
- Lightweight, compact body makes the unit easily transportable
- Provides real-time numerical displays of gloss levels using only the sample measurement
- Detects even the lowest levels of gloss
- No warm-up, one-touch test readings
- Measurement angle from 20 degrees to 60 degrees
- Battery life of 15+ hours
Mohs Scratch Test
Product Information
- Use to determine concrete hardness
- Allows for proper tooling selection to maximize production time and profit on the job
- Scratch test kit consists of four
- 2-sided picks and a grinding stone for sharpening
- Also includes a glass hardness plate and a magnet for calibrating
- Comes with complete instructions
