Single component, self-leveling, premium-grade polyurethane sealant with an accelerated curing capacity.
Sikaflex-1C SL is used to seal horizontal expansion joints in concrete and cementitious slabs such as:
Characteristics and Advantages
Characteristics and Advantages
MSDS | PDS | Color Chart
Sikafloor 300 N is a two part, solvent free, low VOC, elastic, self-smoothing polyurethane resin used as the self leveling wear course for the Sika ComfortFloor Decorative and Sika ComfortFloor
Decorative Pro floor systems.
Sikafloor 304 W is a low VOC, clear, two part waterbased polyurethane matte topcoat for use with flexible membrane systems.
Sikafloor Comfort Adhesive is a two part, durable, high quality adhesive used to permanently adhere prefabricated granular rubber and foam pads to concrete and cementitious screed surfaces. This low VOC, 100% solids polyurethane is particularly suitable to adhere Sikafloor Comfort Regupol 6015H and Sikafloor Comfort Regupol 4580 to the floor surface.
Sikafloor Comfort Porefiller is a two part, total solid, low VOC, polyurethane. It is a flexible, durable high quality urethane compound used for sealing and levelling of the permeable surface of prefabricated granular rubber and foam pads.
Siaksfloor Comfort Regupol 4580 is a prefabricated shockpad produced by bonding polyetherfoam crumbs and fine rubber-dust with a polyurethane compound.
Sikafloor Comfort Regupol 6015H is a prefabricated rubber shockpad produced by bonding rubber crumb with a polyurethane compound.
Sikafloor 200 ESD and Sikafloor 200C ESD coatings are four-component ESD epoxy coating systems designed to impart electrostatic control properties to a variety of substrates in conjunction with ESD footwear, including existing non-conductive substrates and concrete.
Sikafloor 200 ESD can be used in almost any environment where the damaging effects of electrostatic discharge (ESD) cannot be tolerated. Industries currently using these coatings are:
Five component, aliphatic, polyester, ESD control, polyurethane system.
Designed to impart electrostatic control properties to a variety of substrates, including existing non-conductive coatings or resurfacers, vinyl tile, static control tile and concrete. Sikafloor 340 ESD keeps these surfaces smooth, bright, and far more chemically resistant. Its aliphatic nature will keep the coating from yellowing when exposed to ultraviolet light (UV). Sikafloor 340 ESD can be used in almost any environment where the damaging effects of electrostatic discharge (ESD) cannot be tolerated. Industries currently using Sikafloor 340 ESD:
MSDS R | PDS | Color Chart
Coating is a three-component ESD epoxy novolac system designed especially for areas that require both ESD control and chemical resistance to acids and solvents.
Can be used in almost any environment where the damaging effects of electrostatic discharge (ESD) cannot be tolerated. Industries currently using the Sikafloor 700 ESD are:
Two-component, penetrating high solids, light amber, epoxy-based primer/bond coat.
Designed for use as a primer/bond coat specifically in conjunction with Sikafloor Epo-Rok epoxy mortar system. Formulated to penetrate and reinforce the concrete substrate in addition to ensuring a tenacious bond between the Sikafloor Epo-Rok epoxy mortar and the concrete floor.
Two component high solids, low modulus, low viscosity epoxy primer. This epoxy primer is specially formulated to form a tough flexible film.
Designed as a primer for Sikafloor epoxy and urethane coatings as well as the broadcast and troweled systems. Sikafloor 107 should be considered where UV exposure is a concern
Three-component, 36% solids, waterborne-epoxy. As a moisture vapor treatment, Sikafloor FTP will reduce water vapor levels from as high as 8 lbs. per 1.000 sq.ft. to below the acceptable level of 3 lbs. per 1.000 sq.ft in a single coat. This application requires a shotblasted surface.
Use as a moisture vapor treatment under Sikafloor epoxy and urethane coatings as well as broadcast and troweled systems.
Three-component, solvent-free, odorless, moisture-insensitive, epoxymodified, cementitious self-leveling mortar. Especially formulated for leveling and structurally reprofiling on damp, “green” or saturated surface dry concrete slabs, and slabs with excess water vapor transmission rates for thicknesses of 100-160 mil (2.5-4 mm).
As a temporary moisture barrier, minimum thickness 100 mils (2.5 mm), prior to subsequent flooring systems on damp, “green” or saturated surface dry concrete slabs, and slabs with excessive water vapor transmission rates (above 3lbs per 1000 sq.ft. per 24 hours when measured in accordance with ASTM F-1869).
Sikafloor 82 EpoCem is a three-component, solvent-free, odorless, moisture-insensitive, epoxy modified, cementitious, self-leveling mortar. Specifically formulated for leveling and structurally reprofiling on damp “green” or saturated surface dry concrete slabs for thickness of 160-280 mils (4-7 mm).