MM-80
PDS | MSDS
Composition:
MM-80 is a two-component, 100% solids content epoxy joint filler. When cured, MM-80 is a gray, semi-rigid (hard but slightly resilient) filler with a Shore hardness of A90-95.
Basic Use:
MM-80 was developed to fill and protect joints in industrial concrete floors that are subject to hard wheeled material handling traffic and heavy loads. Its primary function is to support such traffic and protect joint edges. MM-80 is designed for use in areas where final temperatures are from 40˚F (10˚C) to +120˚F (49˚C). It is also ideal for joint and crack repair.
MM-80P
PDS | MSDS
Composition:
MM-80P is a two-component, 100% solids content epoxy joint filler. When cured, MM-80P is a gray, semi-rigid (hard but slightly resilient) filler with a Shore hardness of A90-95.
Basic Use:
MM-80P was developed to fill and protect joints in industrial concrete floors that are subject to hard wheeled material handling traffic and heavy loads. Its primary function is to support such traffic and protect joint edges from spalling. MM-80P is designed for use in areas where final temperatures are from 40˚F (10˚C) to +120˚F (49˚C). It is also ideal for joint and crack repair.
Rapid Refloor
PDS | MSDS
Composition:
Rapid Refloor is a two-component, 100% solids structural polyurethane/polyurea hybrid. When cured, Rapid Refloor is a rigid structural polymer with a Shore D Hardness of 70-75.
Basic Use:
Rapid Refloor was developed to repair random cracks and surface spalls/pop-outs and other surface defects in industrial concrete floors that are subject to wheeled traffic. Rapid Refloor is designed for use in industrial or retail concrete floors where final building temperatures are 32°F (0°C) to +120°F (49°C).
RS-88
PDS | MSDS
Composition:
Spal-Pro RS 88 is a rapid setting polyurea polymer liquid of 100% solids content. When cured, Spal-Pro RS 88 is a gray, rubberlike solid with a hardness of Shore A86-90.
Basic Use:
Spal-Pro RS 88 was developed to fill and protect joints in trafficked industrial and retail concrete floors. Its primary function is to support such traffic and protect joint edges. Spal-Pro RS 88 is intended for use where final temperatures are from 32˚F (0˚C) to +120˚F (49˚C).
