BASF – U-Crete, Selby and Degussa

 

basf-logo

Ucrete | Selby | Degussa

 


ucreteUrethane

 


Ucrete FF Primer

PDS | MSDS

Ucrete FF Primer is a two-component fluid-applied polyurethane primer for the Ucrete® Fast Floor System. Ucrete® FF Primer is kit based; both components are shipped in a single 5 gallon (18.95 L) pail containing 3.4 mixed gallons (12.9 L). This primer is specifically designed to provide fast turn-around time for the Ucrete® Fast Floor System (Ucrete® FF Primer and Ucrete® MF).

 


Ucrete HF

PDS

Ucrete HF is a three-component polyurethane-concrete flooring system. This troweled, monolithic flooring system is installed from 1/4 – 3/8″ (6 – 9.5 mm) or greater. The thickness is determined by the service and cleaning temperatures and the severity of traffic expected. Ucrete HF floors are extremely tough and have many physical properties that exceed those of typical concrete.

 


Ucrete HP & HP/Q

PDS | MSDS

Ucrete HP and HP/Q are three-component polyurethane-concrete systems with a broadcast aggregate. Both of these systems are installed at a finished thickness of 1/4 – 3/8″ (6 – 9 mm). The thickness is determined by the service and cleaning temperatures and the severity of traffic expected. Ucrete HP/Q uses a colored quartz aggregate to yield a textured surface. Ucrete HP uses a translucent quartz aggregate. Ucrete floors are extremely tough and have many physical properties that exceed those of typical concrete.

 


Ucrete Iron Filled

PDSMSDS

Ucrete Iron Filled is a four-component polyurethane-concrete, metal aggregate flooring system. This troweled, monolithic flooring system is installed from 1/4″- 1/2″ (6 – 12 mm) or greater. The thickness is determined by the specific facility environment, especially the severity of abrasion expected. Ucrete Iron Filled floors are extremely tough and have many physical properties that exceed those of typical concrete.

 


Ucrete MF

PDS | MSDS

Ucrete MF is a three-component polyurethane-concrete floor system. This horizontal, flowable, monolithic system is applied at a thickness of 3/16 – 1/4″ (4 – 6 mm) or greater and forms a smooth matte surface. The thickness is determined by the service and cleaning temperatures and the severity of traffic expected. Ucrete® floors are extremely tough and have many physical properties that exceed those of typical concrete

 


 Ucrete WR

PDS | MSDS

Ucrete WR is a four-component polyurethane-concrete material. It is used with other Ucrete® products to form cove bases. Ucrete® WR applies by trowel and yields excellent results; it can be installed to a depth of 1/8″ (3 mm) in a single lift or to greater thicknesses in multiple lifts. It is extremely tough and has many physical properties that exceed those of typical concrete

 


Selby

Epoxy

 


MasterTop 1213 (Formally Selbaclad III)

PDS

MasterTop 1213 is a flooring system consisting of a high solids epoxy base coat with an abrasion resistant polyurethane or polyaspartic finish. MasterTop 1213 is squeegee or roller applied to a thickness of 20 mils or greater. The MasterTop 1213 pigmented topcoat can have a slip resistant or smooth surface.

 


MasterTop 1215 AHS (Formally AIRCRAFT HANGAR FLOOR SYSTEM)

PDS

MasterTop 1215 AHS aircraft hangar floor system is a specially formulated epoxy and polyurethane or polyaspartic coating system. It forms a tough, UV-stable, abrasion-resistant flooring system specifically for use in aircraft hangars.

 


MasterTop 1216 (Formally Selbachem 6611)

  PDS

MasterTop 1216 is a 100% solids epoxy, non-reinforced 20 mil coating system. It consists of two 10 mil topcoats applied over a properly primed surface. Its finish can be adjusted to provide various slip resistant textures. It is specifically formulated for areas requiring an increased level of chemical resistance

 


MasterTop 1217CR (Formally Selbachem 6711)

PDS

MasterTop 1217CR system is a 100% solids, non-reinforced topping with resistance to 98% sulfuric acid. It consists of two 15 – 20 mil Novolac topcoats, resulting in a total system thickness of 30 – 40 mils. The finish can be adjusted to provide various slip resistant textures.

 


MasterTop 1234 (Formally Selbatwede 41)

PDS

MasterTop 1234 consists of a two-component 100% solids epoxy-resin binder with colored quartz aggregate. The colored quartz imparts a slip-resistant surface that can be varied by the applicator. It is applied over properly prepared surfaces to a thickness of 1/8″ (3 mm) to 3/16″ (5 mm).

 


MasterTop 1235SL (Formally Selbaclad SL/SLB)

PDS

MasterTop 1235SL is composed of 100% solids, tinted epoxy resins and specially graded aggregates. It is installed at a thickness from 1/16 – 1/8″ (1.5 – 3 mm) or greater. MasterTop 1235SL will handle foot and light wheeled traffic in a variety of industrial and commercial buildings. MasterTop 1235SL can also incorporate a broadcast aggregate for added slip resistance.

 


MasterTop 1236 (Formally Selbachem 6631)

PDS

MasterTop 1236 is a self-leveling 100% solids epoxy coating system applied at 1/8″ (3 mm) in thickness. It consists of a silica flour filled primer and a blended aggregate filled coating. An additional topcoat is required for textured applications. MasterTop 1236 specifically formulated for areas requiring an increased level of chemical resistance.

 


MasterTop 1244 (Formally Selbatwede71)

PDS

MasterTop 1244 is a 100% solids trowel-applied epoxy with colored quartz aggregates. The trowel application will impart more color depth, a smoother finish, and greater durability than the MasterTop 1234 system. It is applied over properly primed surfaces at a depth of 3/16″ (5 mm)

 


MasterTop 1245 CLAD (Formally Selbaclad 425)

 PDS

MasterTop 1245 CLAD is a polymeric flooring system composed of high solids epoxy resins and specially graded aggregates. It is a trowel applied pigmented clad layer with a pigmented finish coat.

 


MasterTop 1246 (Formally Selbachem 6651)

PDS

MasterTop 1246 is a 100% solids epoxy topping. It utilizes chemical-resistant epoxy resins and aggregate blends to create a surfacing base with pigmented topcoats. It is applied over a properly primed surface at a thickness of 1/4″ (6mm). MasterTop 1246 is formulated specifically for areas requiring an increased level of chemical resistance.

 


MasterTop 1247CR (Formally Selbachem 6751)

PDS

MasterTop 1247CR is a 100% solids non-reinforced topping with resistance to 98% sulfuric acid. It consists of pure Novolac resins and aggregate blends used to create a surfacing base with pigmented Novolac topcoats. It is applied over properly primed surfaces at a depth of 1/4″ (6 mm).

 


MasterTop 1249 CLAD (Formally Selbaclad 415)

PDS

MasterTop 1249 CLAD is a 1/4″ (6 mm) polymeric flooring system composed of 100% solids, tinted, epoxy resin components and specially graded aggregates. It is a trowel applied, tinted clad layer with a clear finish coat. This flooring system yields heavy duty performance similar to MasterTop 1245 CLAD with a decorative, natural aggregate look.

 


MasterTop 1254 (Formally Selbatwede HD)

PDS

MasterTop 1254 is a 100% solids, trowel applied epoxy base coat with a decorative broadcast finish. The quartz imparts a slip resistant surface that can be varied by the applicator. It is applied over properly prepared primed surfaces at a depth of 3/16″ (4.5 mm).

 


MasterTop 1291 GLAZ (Formally Selbaglaze)

PDS

MasterTop 1291 GLAZ is a high-solids, glazed epoxy wall system. It is used as a wall and ceiling coating where impact resistance, light reflectivity, and chemical resistance are required.

 


MasterTop GP 500 Coatings (Selby 700 Series)

PDS

MasterTop GP 500 coatings are 100% solids epoxy polymer systems. These coatings are designed to both prime and coat floors. Alternate cure agents can be used to achieve various properties

 


Mastertop TC 407W

Mastertop® TC 407W is a two-component, clear aliphatic polyurethane coating. It provides excellent abrasion resistance, improved scratch resistance and a clear, mat finish.

 


MasterTop TC 493 (Selby N300 CR)

PDS

MasterTop TC 493 is a two-component pigmented or clear, aliphatic polyurethane coating. It provides excellent abrasion resistance, chemical resistance, weather resistance, and color retention

 


MasterTop TC 504 (Selby 400)

PDS

MasterTop TC 504 resins are high solid epoxy polymer formulations. They are designed for use on both floors and walls. Alternate cure agents can be used to achieve various properties.

 


MasterTop TC 565 (Selby 600)

PDS

MasterTop TC 565 is a 100% solids epoxy polymer resin. It is specially formulated for areas requiring an increased level of chemical resistance.

 


 MasterTop TC 570CR (Selbachem 6751)

PDS

MasterTop TC 570CR is a 100% solids, epoxy polymer coating. It is specially formulated for areas requiring an increased level of chemical resistance. MasterTop TC 570CR is a pure Novolac resin with resistance to 98% sulfuric acid.

 


SelbaClad 400

 PDS

Selbaclad 400 is a two-component 100% solids epoxy resin mixed with properly graded aggregates. It is used as an underlayment for epoxy flooring systems or as an economical, highly impact-resistant finished floor.

 


 Selby OP Floor Coating

PDS

Selby OP Floor Coating is a high-solids epoxy polymer system. It is used where a tough, abrasion-resistant, orange-peel-textured coating is required.

 


Degussa

MMA

Methyl Methacrylate

 


Degadur 523

PDS | MSDS

DEGADUR® 523 is a methylmethacrylate topcoat resin for use within the SRS DEGADUR® flooring systems. DEGADUR® 523 is a solvent free, 2-component, 100% reactive resin that is ideal for roller applied coatings and pigmented flooring systems.

 


MasterTop 1817 SRS PC (Formally Degadur R17)

PDS

MasterTop 1817 SRS PC is a methyl-methacrylate (MMA) polymer concrete system designed for a multitude of applications that require a fast-curing, high strength material. MasterTop 1817 SRS PC consists of two components: a liquid methacrylate based resin; and powder component consisting of sand, inert fillers, polymers, pigments and powder hardener. MasterTop 1817 SRS PC is used for thin patches, overlays and grouting, or is filled with coarse aggregate and used for deep patches in slabs. The unique fast cure and durability make the MasterTop 1817 SRS PC suitable for concrete restoration projects, including repairing and rebuilding deteriorated concrete surfaces.

 


MasterTop SRS 32JF (Formally Degadur 332)

PDS | MSDS

Should state description from 32JF document: MasterTop® SRS 32JF is a methyl-methacrylate (MMA) overlay resin for use within the MasterTop SRS flooring systems. MasterTop SRS 32JF is a solvent free, 2-component, 100% reactive resin that is intended for use in self-leveling quartz flooring systems. MasterTop SRS 32JF is ideal for freezer areas, exterior applications or other similar environments that may encounter temperature swings. MasterTop SRS 32JF is mixed with the MasterTop
SRS 100SL to create a self-leveling formulation that reduces application time. MasterTop SRS 32JF is also used within joints and cracks to accommodate substrate movement.

 


MasterTop SRS 40TC (Formally Degadur 410)

PDS | MSDS

MasterTop SRS 40TC is a methyl-methacrylate (MMA) resin for use within the MasterTop SRS flooring systems. MasterTop SRS 40TC is a solvent free,2-component, 100% reactive resin that can be utilized as a primer, overlay or topcoat within a flooring system. MasterTop SRS 102AP bond promoter can be utilized with the MasterTop SRS 40TC as a suitable primer for metal substrate applications. MasterTop SRS 40TC can also be mixed with the MasterTop F 100SL to create a selfleveling formulation that reduces application time. MasterTop SRS 40TC is a transparent resin that can be pigmented using the MasterTop PGM 155.

 


MasterTop SRS 41P (Formally Degadur R41)

PDS | MSDS

MasterTop SRS 41P is a methyl-methacrylate (MMA) primer for use within the SRS MasterTop SRS flooring systems. MasterTop SRS 41P is a solvent free, 2-component, 100% reactive, low viscosity primer. MasterTop SRS 41P has superior penetration and is ideal for adhesion to concrete surfaces. MasterTop SRS 41P is typically used with the MasterTop SRS 103IN to strengthen the curing process of the material penetrating the pores of the concrete substrate. MasterTop SRS 41P should completely seal the concrete surface resulting in a uniform satin finish.

 


MasterTop SRS 51P  (Formally Degadur B71)

PDS | MSDS

MasterTop SRS 51P is a methyl methacrylate (MMA) primer for use within the MasterTop SRS flooring systems. MasterTop SRS 51P is a solvent free, 2-component, 100% reactive, medium viscosity primer. MasterTop SRS 51P has superior adhesion to concrete and is ideal as a primer or sealer for porous concrete surfaces. MasterTop SRS 51P should completely seal the concrete surface resulting in a uniform satin finish. MasterTop SRS 102 AP bond promoter can be utilized with the MasterTop SRS 51P as a suitable primer for tile substrate applications.

 


MasterTop SRS 61BC  (Formally Degadur R61)

PDS | MSDS

MasterTop SRS 61BC is a methyl-methacrylate (MMA) overlay and coating resin for use within the MasterTop SRS flooring systems. MasterTop SRS 61BC is a solvent free, 2-component, 100% reactive resin that is designed for roller applied coatings and decorative flake or quartz flooring systems. MasterTop SRS 61BC can also be mixed with the MasterTop SRS 100SL to create a self-leveling formulation that reduces application time. MasterTop SRS 61BC is a transparent resin that can be pigmented using MasterTop PGM 155 pigments.

 


 MasterTop SRS 71TC (Formally Degadur R71)

PDS | MSDS

MasterTop SRS 71TC is a methyl-methacrylate (MMA) top coat resin for use within the MasterTop SRS flooring systems. MasterTop SRS 71TC is a solvent free, 2-component, 100% reactive resin that is designed for roller applied coatings and decorative flake or quartz flooring systems. MasterTop SRS 71TC is a transparent resin that is ideal for use as a topcoat in flooring systems that utilize decorative flake or quartz broadcast. MasterTop SRS 71TC has superior UV resistance, making it an excellent resin for use in exterior or interior applications resulting in a durable, non-chalking surface.

 


10-61 Rapid Mortar

PDS | MSDS

10-61 Rapid Mortar is a one-component shrinkage-compensated cement-based mortar with an extended working time. It is designed for repairing horizontal concrete surfaces

 


Color Chart

 


 

BASF Performance Flooring Color Portfolio

 

Share Button
css.php