Epoxy 200 Clear
PDS | MSDS
Epoxy 200 is a two component water-based epoxy with excellent adhesion and rapid cure times. Its unique chemistry provides short re-coat times and good low temperature curing. This material has little odor, applies easily and adheres to damp concrete.
Epoxy 200 was designed for use as a fast curing primer under epoxy, acrylic, polyurethane and poly-urea materials. It may also be used as a base coat in fast turnaround color chip systems. Re-coat times range from 30 minutes to 90 minutes depending on film thickness, curing conditions and the type of top coat used.
Epoxy 200 is ideally suited as a primer over properly neutralized interior acid stains where odor cannot be tolerated. Epoxy 200 primer with Polyurethane 100 or Polyurethane 501 top coats may be accomplished in one trip to the job site. Fewer trips to the job site result in reduction of labor costs.
Epoxy 200 Pigmented
PDS | MSDS
Epoxy 200 is a two component water-based epoxy with excellent adhesion and rapid cure times. Its unique chemistry provides short re-coat times and good low temperature curing. This material has little odor, applies easily and adheres to damp concrete.
Epoxy 200 was designed for use as a fast curing primer under epoxy, acrylic, polyurethane and polyurea materials. It may also be used as a base coat in fast turnaround color chip systems. Re-coat times range from 30 minutes to 90 minutes depending on film thickness, curing conditions and the type of top coat used.
Epoxy 200 is ideally suited as a primer over properly neutralized interior acid stains where odor cannot be tolerated. Epoxy 200 primer with Polyurethane 100 or Polyurethane 501 top coats may be accomplished in one trip to the job site. Fewer trips to the job site result in reduction of labor costs.
Epoxy 300 Flex Clear
PDS | MSDS
Epoxy 300 Flex is a 100% solids, medium viscosity, flexible epoxy system. It has excellent elongation, hardness and impact resistance. The material cures, blush-free, and forms a tenacious bond to damp concrete and properly prepared metal.
It can be purchased in a thickened paste version for easy joint and crack filling. A special hardener is available where cold weather curing (down to 40 degrees), or accelerated room temperature cure is required.
Epoxy 300 Flex was developed for industrial joint and crack repair. It’s combination of resilience and physical strength allows it to absorb the impact of heavy loads and steel wheeled traffic. When used as a coating system, it is especially well suited for applications where surface movement, vibrations or thermal cycling may defeat the protection of a rigid material. Typical applications of this type would include wood decks, suspended concrete slabs, mechanical rooms and exterior aggregate-filled flooring. Epoxy 300 Flex has been used successfully as a coating material for aluminum and on steel ship decks.
Epoxy 300 Flex Pigmented
PDS | MSDS
Epoxy 300 Flex is a 100% solids, medium viscosity, flexible epoxy system. It has excellent elongation, hardness and impact resistance. The material cures, blush-free, and forms a tenacious bond to damp concrete and properly prepared metal.
It can be purchased in a thickened paste version for easy joint and crack filling. A special hardener is available where cold weather curing (down to 40 degrees), or accelerated room temperature cure is required.
Epoxy 300 Flex was developed for industrial joint and crack repair. It’s combination of resilience and physical strength allows it to absorb the impact of heavy loads and steel wheeled traffic. When used as a coating system, it is especially well suited for applications where surface movement, vibrations or thermal cycling may defeat the protection of a rigid material. Typical applications of this type would include wood decks, suspended concrete slabs, mechanical rooms and exterior aggregate-filled flooring. Epoxy 300 Flex has been used successfully as a coating material for aluminum and on steel ship decks.
Epoxy 400 Clear
PDS | MSDS
Epoxy 400 is a low viscosity, 100% solids resin system used in a variety of flooring applications including high build coatings, aggregate-filled flooring and decorative epoxy pebble applications. This material cures blush-free and provides an outstanding balance of physical strength, flexibility and chemical resistance.
Epoxy 400 has excellent clarity for use over color quartz aggregate and decorative architectural concrete. The pigmented material features high pigment loading for good substrate hide and color consistency when roller applied. Epoxy 400 has considerably lower viscosity than most competitive products providing improved handling at cooler temperatures and exceptional troweliEpoxy 400 Pigmentedng characteristics. The lower viscosity allows for the addition of fine silica fillers for easy application of “slurry” type floors. A fast cure hardener is available when cold weather curing, (down to 40°F), or accelerated room temperature curing is required. A special hardener is available when adhesion to damp concrete is required.
The versatility of Epoxy 400 makes it ideal as a primer, finish coat or aggregate binder in a wide variety of flooring applications. This includes manufacturing facilities, warehouses, correctional facilities, loading docks and other areas requiring high performance flooring. Epoxy 400 is not recommended for food processing areas, commercial kitchens, wineries or other areas that receive constant corrosive exposure. Epoxy 600 or Epoxy 900 Novolac should be selected for these applications.
Epoxy 400 Pigmented
PDS | MSDS
Epoxy 400 is a low viscosity, 100% solids resin system used in a variety of flooring applications including high build coatings, aggregate-filled flooring and decorative epoxy pebble applications. This material cures blush-free and provides an outstanding balance of physical strength, flexibility and chemical resistance.
Epoxy 400 has excellent clarity for use over color quartz aggregate and decorative architectural concrete. The pigmented material features high pigment loading for good substrate hide and color consistency when roller applied. Epoxy 400 has considerably lower viscosity than most competitive products providing improved handling at cooler temperatures and exceptional troweling characteristics. The lower viscosity allows for the addition of fine silica fillers for easy application of “slurry” type floors. A fast cure hardener is available when cold weather curing, (down to 40°F), or accelerated room temperature curing is required. A special hardener is available when adhesion to damp concrete is required.
The versatility of Epoxy 400 makes it ideal as a primer, finish coat or aggregate binder in a wide variety of flooring applications. This includes manufacturing facilities, warehouses, correctional facilities, loading docks and other areas requiring high performance flooring. Epoxy 400 is not recommended for food processing areas, commercial kitchens, wineries or other areas that receive constant corrosive exposure. Epoxy 600 or Epoxy 900 Novolac should be selected for these applications.
Epoxy 600 Clear
PDS | MSDS
Epoxy 600 is a solvent-free, high performance resin system designed to give improved chemical resistance over standard Bisphenol A based epoxy materials. It has excellent resistance to corrosive food acids, most solvents, 50% sulfuric acid and 15% acetic acid. Epoxy 600 features low viscosity, good troweling characteristics, blush-free cures and good resistance to ambering for an epoxy material. The regular cure material bonds to damp concrete. A fast cure hardener is available where cold weather cure, (down to 40 degrees), or accelerated room temperature cure is required Epoxy 600 was formulated for use as an aggregate binder or top coat where service conditions are too severe for general purpose epoxies, but the performance of Novolac materials is not required.
Epoxy 600 is especially recommended for use in commercial kitchens. Other areas of use would include food and beverage processing plants, battery rooms, wineries, breweries and dairies.
Epoxy 600 Pigmented
PDS | MSDS
Epoxy 600 is a solvent-free, high performance resin system designed to give improved chemical resistance over standard Bisphenol A based epoxy materials. It has excellent resistance to corrosive food acids, most solvents, 50% sulfuric acid and 15% acetic acid. Epoxy 600 features low viscosity, good troweling characteristics, blush-free cures and good resistance to ambering for an epoxy material. The regular cure material bonds to damp concrete. A fast cure hardener is available where cold weather cure, (down to 40 degrees), or accelerated room temperature cure is required Epoxy 600 was formulated for use as an aggregate binder or top coat where service conditions are too severe for general purpose epoxies, but the performance of Novolac materials is not required.
Epoxy 600 is especially recommended for use in commercial kitchens. Other areas of use would include food and beverage processing plants, battery rooms, wineries, breweries and dairies.
Polyurethane 100 VOC Clear
PDS | MSDS
Polyurethane 100 VOC is a two component, high solids aliphatic polyurethane formulated to comply with California V.O.C. regulations. This product offers a remarkable combination of performance properties not found in other polymer coatings. Polyurethane 100 VOC produces protective films which are hard, flexible and very impact resistant. These coatings feature high abrasion and scratch resistance, exterior durability, easy soil release and excellent resistance to a broad range of chemicals. For exterior applications, a U.V. stabilizer package is incorporated to ensure long term chalk resistance and gloss retention. A special accelerator is available when rapid project turnaround is required.
Polyurethane 100 VOC has been designed as a high performance top coat in various protective coating and seamless flooring applications. It provides maximum cleanability and stain resistance when used as a finish coat in color chip flooring or epoxy-quartz flooring. This coating is ideally suited for clean-room floors, automotive repair facilities, aircraft hangars and other high wear areas requiring resistance to fuels and chemicals. When used as a finish coat in wall coating systems, anti-graffiti properties are greatly enhanced.
Polyurethane 100 VOC Pigmented
PDS | MSDS
Polyurethane 100 VOC is a two component, high solids aliphatic polyurethane formulated to comply with California V.O.C. regulations. This product offers a remarkable combination of performance properties not found in other polymer coatings. Polyurethane 100 VOC produces protective films which are hard, flexible and very impact resistant. These coatings feature high abrasion and scratch resistance, exterior durability, easy soil release and excellent resistance to a broad range of chemicals. For exterior applications, a U.V. stabilizer package is incorporated to ensure long term chalk resistance and gloss retention. A special accelerator is available when rapid project turnaround is required.
Polyurethane 100 VOC has been designed as a high performance top coat in various protective coating and seamless flooring applications. It provides maximum cleanability and stain resistance when used as a finish coat in color chip flooring or epoxy-quartz flooring. This coating is ideally suited for clean-room floors, automotive repair facilities, aircraft hangars and other high wear areas requiring resistance to fuels and chemicals. When used as a finish coat in wall coating systems, anti-graffiti properties are greatly enhanced.
Polyurethane 501 Clear
PDS | MSDS
Polyurethane 501 is a high solids, two component, water-based aliphatic polyurethane. This unique material provides performance properties equal to conventional solvent-based catalyzed urethanes without the associated health and environmental problems. Polyurethane 501 meets the 50 grams per liter California VOC limits. It offers substantial performance improvements over first generation catalyzed water-based polyurethanes, including higher film build capabilities, improved chemical resistance and resistance to hot tire staining.
Polyurethane 501 gives hard, durable coatings that feature good gloss, easy cleanability and superior abrasion resistance. Resistance to yellowing from U.V. light is excellent. For exterior desert applications, a special U.V. absorber package can be incorporated to ensure long-term chalk resistance and gloss retention.
Polyurethane 501 has been developed as a high performance finish coat for various seamless flooring,coating, and architectural concrete applications where odor cannot be tolerated. It is the ideal top coat for areas that require maximum gloss retention, ease of cleaning, and resistance to heavy foot traffic. Typical areas of application would include clean rooms, hospitals, concrete counter tops and high traffic retail areas. Polyurethane 501 is also suitable for aircraft hangars, automotive repair facilities and garage floors.
Polyurethane 501 Pigmented
PDS | MSDS
Polyurethane 501 is a high solids, two component, water-based aliphatic polyurethane. This unique material provides performance properties equal to conventional solvent-based catalyzed urethanes without the associated health and environmental problems. Polyurethane 501 meets the 50 grams per liter California VOC limits. It offers substantial performance improvements over first generation catalyzed water-based polyurethanes, including higher film build capabilities, improved chemical resistance and resistance to hot tire staining.
Polyurethane 501 gives hard, durable coatings that feature good gloss, easy cleanability and superior abrasion resistance. Resistance to yellowing from U.V. light is excellent. For exterior desert applications, a special U.V. absorber package can be incorporated to ensure long-term chalk resistance and gloss retention.
Polyurethane 501 has been developed as a high performance finish coat for various seamless flooring,coating, and architectural concrete applications where odor cannot be tolerated. It is the ideal top coat for areas that require maximum gloss retention, ease of cleaning, and resistance to heavy foot traffic. Typical areas of application would include clean rooms, hospitals, concrete counter tops and high traffic retail areas. Polyurethane 501 is also suitable for aircraft hangars, automotive repair facilities and garage floors.
